NANOSKIN AUTOSCRUB Towel 12 x 12 Fine Grade – NANOSKIN Car Care Products

Lasts up to 4 times longer than clay bars• For a flawless “show room perfect” shine• Glides on & off easily for a slick finish• If inadvertently dropped on shop floor, simply rinse clean Product Detail NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required. Application *For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant *To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant. *For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant. DIRECTIONS: Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface. Thoroughly wash vehicle free of dust, sand, and dirt. Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.) Mist sufficient GLIDE onto the surface evenly. Polish the surface with light pressure . Wipe off residue with clean dry microfiber towel. NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. AUTOSCRUB is not solvent resistant. Remove tar & grease before application Helpful Tips: The AUTOSCRUB has a protective coating to ensure stability within transportation. To break in the pad, moisten the AUTOSCRUB with desired lubricant. Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever. Compare with clay bars: AUTOSCRUB Towel Traditional Clay Bars Application Tool Hand Hand Durability 50~80 times 10~15 times Washable Yes No Temp. Sensitivity Low to Medium Medium to High Use with Lubricant Yes Yes Overspray Fast to remove Slow to remove Brake Dust Fast to remove Slow to remove Rail Dust Fast to remove Hard to remove Industrial Pollution Fast to remove Slow to remove Reshape Not required Required
NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required. Application Use: • For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant • To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant. • For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant. NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. AUTOSCRUB is not solvent resistant. Remove tar & grease before application Helpful Tips: The AUTOSCRUB has a protective coating to ensure stability within transportation. To break in the pad, moisten the AUTOSCRUB with desired lubricant. Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don 't use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever. Compare with clay bars:   AUTOSCRUB Towel Traditional Clay Bars Application Tool Hand Hand Durability 50~80 times 10~15 times Washable Yes No Temp. Sensitivity Low to Medium Medium to High Use with Lubricant Yes Yes Overspray Fast to remove Slow to remove Brake Dust Fast to remove Slow to remove Rail Dust Fast to remove Hard to remove Industrial Pollution Fast to remove Slow to remove Reshape Not required Required DIRECTIONS for use Directions: Step 1: Spray sufficient amount of lubricant on the vehicle glass surface Note: Do not allow the lubricant to run dry on the surface. Step 2:Slide Autoscrub across the lubricated surface in a back and forth motion with light to medium pressure.NOTE: Work in a 12x 12 area at a time. Do not allow lubricant to dry on the surface. Step 3:Wipe and buff dry residual lubricant off the surface using light pressure. FOLD AUTOSCRUB TO KEEP CLEAN UNTIL NEXT USE TechnicalInfo Contains: Coming soon

The NanoSkin AutoScrub Sponge will help you safely remove embedded contamination from your paint! The secret is in the advanced rubber polymer technology, which can replace the use of clay bars. It can easily remove paint overspray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Just spray your favorite clay lube onto the surface (i.e.

Nanoskin Autoscrub Sponge - Medium Grade

Nanoskin AUTOSCRUB Surface Prep Towel Fine Grade

NANOSKIN AUTOSCRUB Towel 12 x 12 Medium Grade — Detailers Choice

NANOSKIN AUTOSCRUB Towel 12 x 12 Medium Grade — Detailers Choice

NANOSKIN AUTOSCRUB Towel 12 x 12 Medium Grade – NANOSKIN Car

NanoSkin Glide is a key component in the NanoSkin AutoScrub process and a great quick detailer by itself. Glide not only provides adequate lubrication for the AutoScrub Pads, but it also helps to removes minor contaminants safely, like dust, dirt, fingerprints, bugs, and more! Mist a generous amount of Glide onto the surface and use the AutoScrub Pads to buff off the contaminants with ease. This process will deep clean your finish similar to what a clay bar can do but so much faster.

Nanoskin (NA-GLI16) Glide Instant Detail Spray Lubricant - 16 oz.

NANOSKIN AUTOSCRUB 6 Pad Medium Grade – NANOSKIN Car Care Products

The NanoSkin AutoScrub Sponge will help you safely remove embedded contamination from your paint! The secret is in the advanced rubber polymer technology, which can replace the use of clay bars. It can easily remove paint overspray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Just spray your favorite clay lube onto the surface (i.e.

Nanoskin Autoscrub Sponge - Fine Grade

NANOSKIN AUTOSCRUB Sponge Fine Grade – NANOSKIN Car Care Products