Epoxy Resin 2 Part Designed for Tumbler Cups, Coatings, Brilliant Super Gloss Shine Fast Shipping 1 Gallon Kit

This Epoxy Resin item by IHEARTEPOXY has 28 favorites from shoppers. Ships from Murrieta, CA. Listed on 08 Jan, 2024
Sparkle and shine art/tumbler epoxy coating Is a two part kit (A/B) Resin(A) and Hardener(B). Easy 1:1 Mixing Ratio: No complicated math needed. Simply mix equal parts resin and hardener to get the volume your project needs and create less waste! Tumblers Coating Epoxy | Food-Safe, Non-Yellowing Resin.Sparkle and ShineTumblers Coating Epoxy was formulated to meet the unique needs of crafters and artists needs.It's easy to work with, delivers an ultra-premium glass-like finish, is scratch-resistant, and UV stable so it won't yellow. It's affordable, for use at home as well as for commercial use. Food Safe & Odor-Free: We formulated Tumblers Coating Epoxy with 100% food-safe, FDA-compliant ingredients and made sure that it is odor-free with no VOCs. Glass-Like Finish: I hearts Tumble epoxy's hard, scratch-resistant, clear glass-like finish. Mixes so smoothly that bubbles disappears. Tensile Strength, psi before cracking - 10,500. Fast Cure & Predictable Working Time: Tumblers Coating Epoxy has a working time of 40-50 minutes and cures FAST so your projects will look great! UV Stable, Won't Yellow: Our epoxy is UV stable so it stays crystal clear! Additional Information: Tumblers Coating Epoxy Resin is a clear polymer used for coating wood, veneer, metal, stone, painted surfaces, tabletops, bar tops, many other surfaces to give a rich super gloss look and protect from scratching and air humidity. The typical pot life of Tumblers Coating Epoxy Resin is approximately 40-50 minutes based on mass and temperature. The full cure is 24 hours at normal conditions. Mixing: Mix this resin 1:1 by volume. Smoothly mix for at least 3-5 minutes until the chemical is clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items. Storage: This chemical needs to be stored in a dry, safe, temperature-controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. Safety: When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products. Pro Tips: If mixing by weight (under 50 grams), mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of the mixing container. Improperly mixed epoxy can create a major headache. Cold weather slows the curing process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature. For best results, try pouring epoxy into the hardener. Pour along the side of the container to help reduce microbubble creation. You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.

Tumbler Kit (Epoxy Free) – The CrystaLac Store

époxy Cup Kit

Epoxy Resin 1 Gallon

Epoxy Resin, 2 Gallon Super Gloss Epoxy Resin Kit, Self Leveling No Bubble Easy Mix 1:1 Casting & Coating Resin and Hardener Kit for Jewelry Casting, DIY Art, Table Top, Molds

Epoxy Tumbler Kit

époxy Cup Kit

Pen Blanks irish Gold Maple Burl Hybrid Alumilite Resin Casting

Epoxy Resin 2 Part Designed for Tumbler Cups, Coatings, Brilliant Super Gloss Shine Fast Shipping 1 Gallon Kit

Stabilized Cholla Cactus in Indigo. Knife Making Resin Handle

2 Gallon Kit super Clear Coat Epoxy Resin Liquid Glass Art Super Gloss Clear DIY

TNT 1993 7.25 Unfinished Pecan Resin Pencil Style