Rubber-Cal Closed Cell Sponge Rubber EPDM 3/8 in. x 39 in. x 78 in

This is a closed cell foam rubber composed of EPDM (ethylene propylene diene monomer). Foam rubber, otherwise known as rubber sponge, is named for the many air pockets located throughout the rubber material.
This is a closed cell foam rubber composed of EPDM (ethylene propylene diene monomer). Foam rubber, otherwise known as rubber sponge, is named for the many air pockets located throughout the rubber material. These particular foam rubber sheets are closed cell sponge, meaning that the air pockets within it are sealed. These sealed air pockets prevent closed cell EPDM from absorbing moisture while also slowing the rate at which the rubber material transfers energy and heat. Since EPDM is already water resistant and relatively heat tolerant for a material, closed cell EPDM is great for aquatic and heat insulation applications. Overall moisture resistance also allows closed cell EPDM rubber to form an effective seal against water, such as for gasketing. EPDM is an especially suitable elastomer for outside applications because it is durable and does not degrade easily. Unlike various other polymers, EPDM resists cracking or discoloration from many common outdoor sources of wear and tear, including UV rays, ozone anda the weather. These properties allow closed cell EPDM rubber to last a long time outdoors, even under prolonged exposure to direct sunlight.

Rubber-Cals EPDM rubber sheeting is a versatile product with superior resistance to intense physical conditions. This synthetic rubber compound is made of a combination of ethylene propylene diene monomer (EPDM) and styrene butadiene rubber to inherit the strengths of both materials. The addition of SBR rubber gives this synthetic rubber sheeting a high level of physical durability and endurance for use in demanding applications.

Rubber-Cal EPDM Rubber Sheet - 3/8 in. Thick x 24 in. Width x 12 in. Length - Black - 60A Durometer

Potlimepan EPDM Non-Adhesive Sponge Foam Rubber Roll, Perfect Cosplay Padding, DIY Project Sheet, Multi-Function Soundproof Rubber Foam Sheet, Easy to Cut (1/2 T x 13 W x 60 L, 1): : Industrial

Rubber-Cal Closed Cell Sponge Rubber EPDM 3/8 in. x 39 in. x 78 in. Black Foam Rubber Sheet 02-129-0375 - The Home Depot

Rubber-Cal Silicone 1/4 in. x 36 in. x 48 in. Red/Orange Commercial Grade 60A Rubber Sheet 20-***-****-36-048 - The Home Depot

This is a closed cell foam rubber composed of EPDM (ethylene propylene diene monomer). Foam rubber, otherwise known as rubber sponge, is named for the

Rubber-Cal Closed Cell Sponge Rubber EPDM 3/8 in. x 39 in. x 78 in. Black Foam Rubber Sheet 02-129-0375 - The Home Depot

Rubber-Cal Closed Cell Sponge Rubber EPDM 3/8 in. x 39 in. x 78 in. Black Foam Rubber Sheet 02-129-0375 - The Home Depot

Rubber-Cal Open Cell Rubber - EPDM - 1/2 Thick x 39 Width x 78 Length - Black : Industrial & Scientific

Rubber-Cal Closed Cell Rubber EPDM - 3/8 Thick x 39 x 78

EPDM is an all-purpose, synthetic rubber made for applications that especially demand all-weather capabilities. Compared to other types of rubber,

EPDM Rubber Sheet Black 60A 0.500 in. x 36 in. x 72 in.

Industrial Neoprene is a blend of SBR (Styrene Butadiene Rubber), CR (Neoprene) and NBR (Nitrile) rubbers. It is moderately oil and ozone resistant, for use as bumpers, pads, sealing and general gasket applications. Neoprene sheets are the most popular and used industrial rubber sheet due to its all-around excellent qualities. Neoprene could be used in almost any application that a rubber part maybe needed. Neoprene is also available in a denser and stiffer version.

Rubber Cal 20-103 Neoprene Commercial Grade 70A 1/8 in. T x 24 in. W x 12 in. L Rubber Sheet (3-pack)