5° SWEDISH WRAP ( SW ) DIE SET ( 4 DIES) COIN RING MAKING TOOLS

The inside angle is 5 degrees which is much less than that of the fold over reduction dies. Also with 4 different sized dies instead of just 2 or 3, you have more sizes to work with. You will still need a fold over die to start the process of making a ring then move to these dies to finish up.

This is a coin ring die made to do the Swedish Wrap Method of making coin rings where you keep pressing the coin down into the die to make a very flat

1.5 COIN RING MAKING TOOLS 5° DIE SET FOR SWEDISH WRAP (SW) DIE ADD ON KIT

Part 1 : Swedish Wrap Dies Set with brass push rods - Coin Ring Making

Swedish Wrap Die Set (3 dies, 6 double sided push rods) – Legacy Brand Coin Ring Tools

7° (4 Dies) Swedish Wrap (Sw) Coin Ring Making Tools Die Set

The inside angle is 5 degrees which is much less than that of the fold over reduction dies. Also with 4 different sized dies instead of just 2 or 3,

5° SWEDISH WRAP ( SW ) DIE SET ( 4 DIES) COIN RING MAKING TOOLS

This is a coin ring die set of 4 dies and 8 push rods. The inside angle is 5 degrees. Use these dies to reduce your ring down in size and also to get

4 SWEDISH WRAP DIES @ 5° FOR COIN RING TOOLS PLUS 8 PUSH RODS

THE ORIGINAL One Swedish Die of your choice for replacement or to build your own kit (a la cart….no plungers) – Coin Ring Tools & Custom Made Coin Rings – Jason's Works

Coin Ring Folding Dies – Legacy Brand Coin Ring Tools

Made in the USA

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method

THE ORIGINAL Master Swede Kit – Coin Ring Tools & Custom Made Coin Rings – Jason's Works

Swedish Wrap Die - 1.6 die with 2 double sided brass rods

Part 1 : Swedish Wrap Dies Set with brass push rods - Coin Ring Making