4.5 inch HOLO Rose Silicone Mold for Resin – JuliArtStudio

By A Mystery Man Writer

Last updated 18 Jun 2024

4.5 inch HOLO Rose Silicone Mold for Resin – JuliArtStudio

** Please read all Important Notes below before purchasing ***

4.5 inch HOLO Rose Silicone Mold for Resin casting. Finished resin product will be approximately 4.5 inch wide and 1/4 inch thick.

HOLO molds will give your resin castings holographic effect. Perfect to make suncatcher, coaster, ornaments, or embellishments for other art projects.

Listing price is for 1 piece of silicone mold only. Finished resin product not included.

Tips on how to use HOLO Molds:

- Let your epoxy resin cure completely hard before demolding. Do not use these molds with UV resin since UV resin needs clear molds to cure properly.

- Do not brush mica powder directly on the mold. Best way is to mix colorant and glitters in epoxy resin first then pour into the mold.

- Do not put top coat on the holo side of the resin piece. Holo effect will disappear if submerged in resin.

IMPORTANT NOTES:

*** All HOLO molds are 100% handmade from mixed materials. There will be some imperfection on mold surface but it will still give off beautiful holographic effect for your artwork.

*** HOLO surface is fragile so please accept scratches with uses.

*** Please feel free to sell any resin artworks made from this mold, but replicating my mold design is strictly prohibited.

*** Like all other molds, HOLO molds will get dull over time, but if you don't use heat when resin is inside the molds, your HOLO molds will last longer.

***Silicone mold received will be in random color. No custom mold color.

*** This silicone might not be compatible with pressure pot.

*** Do NOT expose silicone mold to heat by using torch or heat gun while resin is inside the mold. Heat will damage mold surface.

*** This mold is NOT food safe.

*** Please make sure to read and agree with my Shop Policy for any FAQ's before you purchase my molds!

** Please read all Important Notes below before purchasing *** 4.5 inch HOLO Rose Silicone Mold for Resin casting. Finished resin product will be approximately 4.5 inch wide and 1/4 inch thick. HOLO molds will give your resin castings holographic effect. Perfect to make suncatcher, coaster, ornaments, or embellishments for other art projects. Listing price is for 1 piece of silicone mold only. Finished resin product not included. Tips on how to use HOLO Molds: - Let your epoxy resin cure completely hard before demolding. Do not use these molds with UV resin since UV resin needs clear molds to cure properly. - Do not brush mica powder directly on the mold. Best way is to mix colorant and glitters in epoxy resin first then pour into the mold.- Do not put top coat on the holo side of the resin piece. Holo effect will disappear if submerged in resin.IMPORTANT NOTES:*** All HOLO molds are 100% handmade from mixed materials. There will be some imperfection on mold surface but it will still give off beautiful holographic effect for your artwork.*** HOLO surface is fragile so please accept scratches with uses.*** Please feel free to sell any resin artworks made from this mold, but replicating my mold design is strictly prohibited.*** Like all other molds, HOLO molds will get dull over time, but if you don't use heat when resin is inside the molds, your HOLO molds will last longer.***Silicone mold received will be in random color. No custom mold color.*** This silicone might not be compatible with pressure pot.*** Do NOT expose silicone mold to heat by using torch or heat gun while resin is inside the mold. Heat will damage mold surface.*** This mold is NOT food safe.*** Please make sure to read and agree with my Shop Policy for any FAQ's before you purchase my molds!