Volleyball Boundary Non-Adjustable 1-inch Webbing

By A Mystery Man Writer

Last updated 17 May 2024

Volleyball Boundary Non-Adjustable 1-inch Webbing

These 1 inch non-adjustable heavyweight volleyball court boundaries are simple to set up and are offered in two court sizes. Made in the USA, and ships quickly
ALL SALES FINAL ON CLEARANCE ITEMS. This item is slightly scuffed. Barely noticeable - otherwise good condition. 15% off retail price! Style #17NA Quick Setup, Non-Adjustable Large Nickel Plated Steel Rings Stitched Corners Heavy Weight Flat Webbing Anchors with Bungee Cord Attached Sand Setup Storage Holder Included One-inch wide heavy weight UV treated polypropylene webbing boundary system. 26.3 x 52.6-ft (8-Meter). The two sections include three lengths of webbing with 1.5-inch nickel plated steel rings, box stitched at each corner. the lengths join together at center court under the net with plastic side release buckles. Hand winder provided for tangle free boundary storage. Four 10-inch long ABS plastic sand pegs (#BTS). Anchor types include approximate length of 2-ft by quarter inch thick bungee cord with small zinc plated s-hook. The suspended webbing enables the boundary to form a perfect rectangle. Will then stretch when tripped on for added safety. Stitched splices may be present. Made in USA

Four section red 30 X 60-foot adjustable, 1-inch wide heavy weight UV treated polypropylene webbing court boundary system. Can even adjust down to 8-meter court size.Complete set includes: four 15 x 30-ft sections with steel rings stitched at each corner. Join together in middle of each length with plastic side-release buckle. Allowing you to fine-tune court dimensions with 30-ft tape measure. Center court markings are the side-release buckles on each end.

Home Court M817NAYS 8 Meter Yellow 1-Inch Non-Adjustable Web Courtlines

Home Court Two-Inch Webbing Court

A four section adjustable 26.3 x 52.6-ft by 2-inch wide heavy weight UV treated polypropylene webbing court boundary system. Complete set includes: four 13.2 x 26.3-ft sections with nickel plated steel rings stitched at each corner. They join together in middle of each length with plastic side-release buckle. Allowing you to fine-tune court dimensions with tape measure. Center court markings are the side-release buckles on each end.