FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore

By A Mystery Man Writer
Last updated 09 May 2024
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
An affordable easy to install solution for adding security to your valuables! Whether you re looking to add some security to an office desk drawer or want to restrict access to the liquor cabinet while you re away from home this keyed lock from Desunia can help! Specifications - The cylinder on this
An affordable, easy to install solution for adding security to your valuables!Whether you're looking to add some security to an office desk drawer, or want to restrict access to the liquor cabinet while you're away from home, this keyed lock from Desunia can help!Specifications- The cylinder on this lock measures .866 in diameter and requires a 7/8 hole.- The length of the cylinder is 15/16, so when installed in a 3/4 door/drawer front, it will project 3/16 off the face.- Keys are all identical, allowing you to purchase multiple locks without having to keep track of what key goes where.- Throw bolt has 7/16 of travel.Installation Tips- Examine the operation of the lock to determine where to bore your hole.- Bore a 7/8 diameter hole with a sharp bit (be sure to clamp a back up board to the piece to avoid chipping out the back).- Mount the lock with the provided screws.- Install the strike plate, taking into account that because every situation is different, some wood blocking may be necessary to achieve proper alignment.- Complete the installation by installing the escutcheon trim ring. This should fit snuggly, but if there's any play, a drop of glue should secure it just fine.Here's what you get- 1 Lock with 7/8 cylinder- 2 Keys- 1 Nickel strike plate- 1 Matching escutcheon trim ring- All the necessary screws
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
cabinet locks & latches - Baer Supply Company
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
SHEET METAL CAM LOCK - KEYED DIFFERENTLY - Sugatsune
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
RELIABILT Chrome Steel Cabinet/Drawer Lock in the Drawer Hardware department at
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Defender Security U 9945KA Diecast Keyed Alike Drawer & Cabinet Lock – 3 Cams, Trim Collar, 2 Washers, 2 Keys & Fasteners – 1-1/8” Length for 13/16” Max Panel Thickness, Stainless Steel (Single Pack) - Yahoo Shopping
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Emtek 7442US15 Knob - Emtek Keyed 2 x 10 Stretto 7442
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Compx Cylinder Pin Tumbler Cam lock 1-3/16 Cylinder Length for 7/8
The Kingsley Cam Lock has a 1-1/8′′ cylinder length and can accommodate material thickness up to 7/8′′ thick. The 1-1/4′′ cam can be installed at the 12, 3, 6 and 9 o’clock positions with a 90 degree turn. The stop cam is reversible so that the lock key can either be turned to the right or left to open. The cylinder diameter is standard at 3/4′′. The small cam lock is constructed of zinc alloy and is chrome plated.
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Kingsley Tubular Cam Lock with 1-1/2 Cylinder-Chrome Finish, Keyed Alike, RV Lock Replacement, Camper Lock, Cabinet Lock, ATM, Vending Machine Lock
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Quincy Keyed 5-1/2 C-to-C Sideplate Lock
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Hardware - Smart Handle and Lockset Package - Pivot Door Company
An affordable, easy to install solution for adding security to your valuables!Whether you're looking to add some security to an office desk drawer, or
FURNITURE HARDWARE :: Locks :: Keyed Alike Cabinet Lock - 7/8 Bore
Keyed Alike Cabinet Lock - 7/8 Bore

© 2014-2024 buhard-antiquites.com. All rights reserved.