Amana 3-1/8 3-Wing Straight Edge Cutter

Get the Amana 3-1/8" 3-Wing Straight Edge Cutter for all your shaping needs. With over 250 different cutters, this tool offers extra-thick carbide tips for longer tool life and many resharpenings. It has a 12,000 RPM rating and under, 1/4" of cutting heig
A leading provider of quality products to the woodworking industry.
Features:• Over 250 different cutters for all your shaping needs• Extra-thick carbide tips offer many resharpenings and longer tool life• 12,000 RPM rating and under• 1/4 of cutting height• 1/2 and 3/4 of bore• Cutters are furnished with either 1/2, 3/4 or 1-1/4 bore• Cutters with 3/4 bore include 2 reduction bushings (1/2 x 3/4) which will reduce the bore to 1/2• Cutters with 1-1/4 bore include 2 reduction bushings (1 x 1-1/4) which will reduce the bore to 1

(D) diameter: 3-3/8 (B) Cutting height: 1/4 USA Corporate headquarters and warehouse, located in new York Commitment to offer the highest consistent

Amana Tool - SC673 Carbide Tipped 3-Wing Straight Edge 3-3/8 Dia x 1/4 x 1 & 1-1/4 Bore

45790 Carbide Tipped V Joint 80 Deg x 1-3/8 Dia x 1-37/64 x 1/2 Inch

(D) diameter: 1-7/8 (B) Cutting height: 1/4 USA Corporate headquarters and warehouse, located in new York Commitment to offer the highest consistent

Amana Tool - SC672 Carbide Tipped 3-Wing Straight Edge 1-7/8 Dia x 1/4 x 1/2 & 3/4 Bore

All Amana Tool – Feeney Supply

(D) diameter: 2 (B) Cutting height: 1 USA Corporate headquarters and warehouse, located in new York Commitment to offer the highest consistent quality

Amana Tool - SC610 Carbide Tipped 3-Wing Straight Edge 2 Dia x 1 2 Bore

Amana 969 Carbide Tipped 3-Wing Ogee 1/2 Radius x 3-1/4 Dia x 7/8 x 1/2 & 3/4 Bore

All Amana Tool – Feeney Supply

Carbide Tipped Shaper Cutter - Amana Tool 948, 2-1/2 D x 1/2 CH

(D) diameter: 4 (D) Bore: 1-1/4 (B) Cutting height: 1/2 (R) radius: 1/8 B1: 1/4

Amana Tool - A-29-100 Carbide Tipped 3-Wing Heavy-Duty Bead 1/8 Radius x 4 Dia. x 1/2 x 1

Amana Tool Carbide Insert 3-Cutter Spoilboard Router Bit

These sets include two trim cutters for stock 7/8 through 1 in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8 thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8 to 1 thick, a template must to used.

Amana 55420 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 D x

Carbide Tipped Shaper Cutter - Amana Tool SC673, 3-3/8 Edge Cutter

Amana 61292 Insert Carbide Spiral Jointing 62mm (2-1/2) Dia x 80mm