Ash Veneer Edgebanding

Ash hardwood veneer edgebanding. 10mil thick with two backing options, Hot-Melt Glue or Paper-Back. Cover any cheap plain wood to make it look like its made of solid ash hardwood.
Ash wood veneer edge banding Sold in three widths 7/8”, 1, and 2. Purchase by the 25 foot section or by the full roll. HM Glue full rolls are 250’. Full roll of paper back edgeband is 500’.  For multiple units purchased, the longest possible continuous piece will be sent.  If a specific length is required, please contact us. Felt/Paper Backer: This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. It is recommended to apply a thin layer of contact cement to both the surface being covered and the edgebanding. The contact cement should be tacky before applying edgebanding to surface, this should only take a few minutes. Gently press edgeband onto the surface and work out any air bubbles with gentle pressure. Full roll with this backer is 500’. Hot Melt Glue Backer: A high quality EVA hot melt adhesive is on the back. There is no additional adhesive needed with this glue. This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. Before applying hot iron, cover with cotton cloth. It is recommended to move the hot iron in a circular pattern until adhesive adheres to surface. Scorching will occur if hot iron is left too long in one spot. Full roll with this backer is 250’.

Ash prefinished wood veneer edgebanding in 7/8 x 120 nonglued rolls (10 feet). Ash roll is in first picture and other species in the last pictures.

Ash prefinished wood veneer edgebanding in 7/8 x 120 nonglued thin fleece back

Jiashan Shunfang Woodworks Co., Ltd. - Veneer, Wood Veneer, Edgebanding

PVC Edgeband - Formica White Ash 8841

Ash - Natural

ll, SKU VNG1.5WHO7/8

White Oak Veneer Edgebanding, Unglued, Unfinished 7/8 x 1.5mm, 328ft per roll, SKU VNG1.5WHO7/8

, Our Ash edge banding comes pre-glued with heat activated backing for easy application. The rolls come standard in 7/8 inches thick in rolls or

Ash Edge Banding

Introducing E • Frog, new edgebanding for popular prefinished

Ash Wood Veneer edgebanding roll 7/8 x 50' preglued hot melt

Jiashan Shunfang Woodworks Co., Ltd. - Veneer, Wood Veneer, Edgebanding

Craftsmen Hardwoods Inc.

Brand: Red Oak wood veneer edgebanding hot melt adhesive Model: Wood veneer edge banding Oak Red thin fleece back

Red Oak Wood Veneer edgebanding 3.25 x 120'' with preglued Adhesive (3-1/4)

Ash Veneer Edgebanding

roll, SKU VPGBIW7/8

White Birch Veneer Edgebanding, Preglued, Unfinished 7/8 x 0.6mm, 250ft per roll, SKU VPGBIW7/8

Roll Sizes: 7/8 x 250', 7/8 x 500' Backers: pre-glued, fleeceback

Ash Edge Banding

Wood Veneer Edgebanding - Metro Hardwoods