1/8 Cherry Plywood / Cherry wood for laser cutters

UNFINISHED 1/8 CHERRY PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED, Boards are cut 11 3/4 by 19 by hand. There may be very slight variations but they

Craft Wood — Thin-sawn, 100% pure hardwood planks designed for crafts; Natural wood blanks for laser cutting & engraving machines; Durable & strong,

The Hardwood Edge Cherry Wood Planks - 8-Pack Cherry Craft Wood for Unfinished Wood Crafts - 1/4'' (6mm) 100% Pure Hardwood - Laser Engraving Blanks

1/8 Sapele Plywood / Sapele for laser cutters – Laser Wood Supplies

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish.

Woodcraft Woodshop Cherry - 1/8 x 3 x 24 65000

These are Real Cherry Wood veneers layed up on an MDF/fiberboard core. , Veneer Grade: A1 , These are real wood veneers color and grain patterns will

1/8 x 12 x 20 Cherry Plywood - Perfect Laser Cutting - Glowforge - Cherokee Wood Products (40)

UNFINISHED 5/32 WHITE BIRCH PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED Boards are cut 11 3/4 by 19 by hand. There may be very slight variations but

5/32 White Birch Plywood / wood for laser cutters

The Hardwood Edge Ash Wood Planks - 4-Pack Ash Wood for Unfinished Wood Crafts - 1/8'' (3mm) 100% Pure Hardwood - Laser Engraving Blanks - Ash Wood Blanks for Crafts and Gifts

Builders Choice 1 in. x 6 in. x 8 ft. S4S Cherry Board C16010608X - The Home Depot

UNFINISHED 5/32 WHITE BIRCH PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED Boards are cut 11 3/4 by 19 by hand. There may be very slight variations but

5/32 White Birch Plywood / wood for laser cutters

UNFINISHED 1/8 MAHOGANY PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED, Boards are cut 11 3/4 by 19 by hand. There may be very slight variations but

1/8 Mahogany Plywood / Mahogany for laser cutters

UNFINISHED 1/8 WALNUT PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED, Boards are cut 11 3/4 by 19 by hand. There may be very slight variations but they

1/8 Walnut Plywood / Walnut for laser cutters

11.5x19 1/8 Cherry Plywood 3mm Cherry Wood Glowforge Ready CNC Laser Woodworking Supplies Natural Unfinished - Hong Kong

Barrington Hardwoods - Premium Boards, Bowl, and Turning Lumber

Light Plywood takes your projects from start to finish quickly. Compared to Medium Plywood, Light Plywood is thinner, weighs less, and cuts twice as fast. The core is natural hardwood, rather than engineered material, so its stronger in one direction than the other.

Glowforge Proofgrade Light Plywood - Cherry - 12 x 12 in

Cherry 1/4 Double Sided — Craft Closet