Logan Graphics FoamWerks Foamboard Straight Cutter (WC6001) – Printer's Parts & Equipment -USA

The WC6001 FoamWerks Straight Cutter from Logan Graphics is designed to cut into foam or foam board, which can be used for craft projects, art projects, 3D modeling, architectural designs, and many other applications.It cuts straight edges into the foam board at adjustable heights ranging from 1/8" to 1/2". The height

The WC6001 FoamWerks Straight Cutter from Logan Graphics is designed to cut into foam or foam board, which can be used for craft projects, art projects, 3D modeling, architectural designs, and many other applications.

It cuts straight edges into the foam board at adjustable heights ranging from 1/8 to 1/2. The height of the blade is adjusted with the thumb dial located in the rear of the straight cutter. Above the thumb dial there is a blade storage compartment, neatly concealing the blades. The cutter is compatible with WC-5, WC-20, and WC-50 blades. The blade is placed into the magnetic blade slot and secured with the quick change blade clip.

The WC6001 Straight Cutter is compatible with the FoamWerks Channel Rail, Logan Adapt-A-Rule, and Team System by clipping to the edge of the rail, directing the blade for a straighter cut. Logan Graphics always recommends having an extra piece of foam under the foam being cut as the blade can be damaged if it hits a hard surface.

The WC6001 FoamWerks Straight Cutter from Logan Graphics is designed to cut into foam or foam board, which can be used for craft projects, art projects, 3D modeling, architectural designs, and many other applications.It cuts straight edges into the foam board at adjustable heights ranging from 1/8 to 1/2. The height of the blade is adjusted with the thumb dial located in the rear of the straight cutter. Above the thumb dial there is a blade storage compartment, neatly concealing the blades. The cutter is compatible with WC-5, WC-20, and WC-50 blades. The blade is placed into the magnetic blade slot and secured with the quick change blade clip.The WC6001 Straight Cutter is compatible with the FoamWerks Channel Rail, Logan Adapt-A-Rule, and Team System by clipping to the edge of the rail, directing the blade for a straighter cut. Logan Graphics always recommends having an extra piece of foam under the foam being cut as the blade can be damaged if it hits a hard surface.

Logan Graphics FoamWerks Foamboard Straight Cutter (WC6001) – Printer's Parts & Equipment -USA

Asianhobbycrafts Logan WC-2001 FoamWerks Foam Board V-Groove Cutter : : Office Products

The WC6001 FoamWerks Straight Cutter from Logan Graphics is designed to cut into foam or foam board, which can be used for craft projects, art

Logan Graphics FoamWerks Foamboard Straight Cutter (WC6001)

Asianhobbycrafts Logan WC-2001 FoamWerks Foam Board V-Groove Cutter : : Office Products

Asianhobbycrafts Logan WC-2001 FoamWerks Foam Board V-Groove Cutter : : Office Products