80W CO2 Laser Engraver - Pay as Low as $129/mo. - OMTech – OMTech

Engrave your dream creations with our 80W CO2 Laser Engraving Machine. This laser engraving machine has dual lasers, a LCD display, and red dot laser.
SKU: USB-106D-US Download the Manual Download the software RDworks Do you want to visit an OMTech machine in person? Schedule a Demo Room visit here Here is the Replacement Tube, Power Supply, Mirrors, and Lens.  Convenient Size: 23.5” x 39.5” (600 x 1000 mm) engraving/cutting area 63” x 49” x 39” (160 x 124 x 100 cm) overall dimensions Net Weight 573 lbs (260kg) Tackle large projects with ease. An adjustable stabilizing base allows easy height adjustment. Specs: Recommended engraving speed: 100 - 500mm/s Recommended cutting speed: 1 - 30mm/s (actual speed depends on material) 20mm Focal lens diameter 2 Focal length 25mm Mirror diameter Resolution up to 2540 dpi 7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted) 8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards) Compatibility: The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included) RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista. The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included) Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.  4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4-Wheel Rotary or Jaw Chuck Rotary Device use. Power: The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities! Cut up to 9 mm (.35″) thick acrylic/plexiglass Uses standard 110V AC power connection Laser Tube Lifetime: Two 80W CO2 laser tubes with estimated lifetimes of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10–40% = 7,000–8,000 Hours Moderate Power 40–70% = 5,000–6,500 Hours High Power 70–100% = 3,000–4,000 Hours Average Parameter Settings: Click Here Cutting Edge Features: DOUBLE YOUR EFFICIENCY: Equipped with two 80W laser tubes and two laser heads to engrave two sections at once, effectively doubling your production speed. It’s perfect for professional applications where work efficiency is a top priority. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life.  MOTORIZED Z-AXIS: An electric lift powers the workbed's ascent/descent function, allowing effortless platform height adjustment to accommodate bulky objects and help you focus the laser head. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.  AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process. Package Includes: 1 x Laser Engraver Machine 2 x Water Pump 1 x Storage Tank 1 x Ethernet to Ethernet Cable 1 x Grounding Wire 1 x Venting Exhaust Duct (4 ft. max. length) 4 x Water Hoses 1 x USB Drive with Software 1 x USB Type-A to Type-A Cable 1 x Stainless Steel Clamp 10 x Hex Wrenches 1 x Double-sided Tape 1 x Power Cord 1 x Accessory Bag 2 x Keys 1 x Silicone Sealant 1 x Instruction Manual Warranty: No need to worry! We offer a 2-year parts warranty on all machines. 1-year warranty on laser tubes and laser power supplies 80W and up Certifications: FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California Compatible Materials: Laser Cutting: Acrylic *Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood  Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic *Aluminum *Stainless Steel *Titanium *Cannot cut hardwoods like mahogany *CO2 lasers only mark bare metals when anodized or treated. Contact us with questions on specific materials not listed, we can process a sample for confirmation. Some PVC-based acrylics can create toxic fumes when lasered.

80W CO2 Laser Engraver - Pay as low as $94/mo. - OMTech – OMTech Laser

OMTECH PRO 2440, 80W AND 100W CO2 Laser Engraver Cutting Machine

80W CO2 Laser Engraver - Pay as Low as $85/mo. - OMTech

OMTech 80W CO2 Laser Engraver with LightBurn & Water

100W CO2 Laser Engraver - Pay As Low As - OMTech

OMTech 80W CO2 Laser Engraver, 20x28 Inch Laser

OMTech 80W CO2 Laser Engraver, 20x28 Inch Laser

80W CO2 Laser Engraver - Pay as Low as $129/mo. - OMTech – OMTech

Pre-Owned AF2435-80 - 80W CO2 Laser Engraver Cutting Machine

60W CO2 Laser Engraver - Pay as Low as $73/mo. - OMTech – OMTech Laser

OMTech 80W CO2 Laser Engraver with Water Chiller

80W CO2 Laser Engraver - Pay as Low as $129/mo. - OMTech – OMTech