Envirotex Lite Polymer Coating : TAP Plastics

TAP Clear-Lite Casting Resin : TAP Plastics

Christo Braun's Artwork : TAP Plastics

Environmental Technology EnviroTex Lite Pour-On High

EnviroTex Lite

How to Use Enviro-Tex Lite : Pour On High Gloss Finish

is a fast-drying, acrylic spray used as a finish coat to seal polyester resin castings. It can also be used as a multi-purpose clear gloss finish

Castin' Craft Resin Spray & Sealer

Put a high-gloss, waterproof finish on your projects for a striking, lustrous effect. This unique formula is a reactive polymer compound specially

EnviroTex Lite® Pour-On High Gloss Finish

is slow curing, ultra-clear, deep pour epoxy that dries rock solid. The plastic resin formula has minimal bubbles, goes on smooth, helps eliminate

Pourable Plastic Clear Casting Resin

6 Pack: EnviroTex Lite® Pour-On High Gloss Finish, 16oz., chess

Cut to Size, Polycarbonate & Acrylic Plastics : TAP Plastics

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

One coat equals up to 50 coats of varnish Extremely high gloss Protects and beautifies wood or most anything For interior use only Coverage: 32 sq. ft. per 3.78 L Now an incredible glossy finish is a pour away. EnviroTex Lite is a water clear reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to produce a high gloss.

Envirotex Lite Pour on High Gloss Finish 128oz

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

Envirotex Lite Polymer Coating : TAP Plastics

Envirotex Lite Acrylic Pour-On High Gloss Finish - 8oz, 32oz