Foam Fusion – brickintheyard

Our Foam Fusion is the ultimate foam glue for EPS and XPS! It permeates the foam and bonds around its cells. Other glues containing solvents will dissolve foam over time, but our formula is nontoxic and solvent-free. Our glue is not affected by heat or cold as with glue guns, and it does not expand. It works with most rigid foams including polystyrene foams, like Styrofoam, white beaded EPS foam, and XPS foams (blue and pink board). Foam Fusion bonds foam to almost any porous surface and is easy to apply - simply brush or squeegee on. Apply a very thin layer on each side - it goes a long way. Available in 4 sizes.Hot Wire Foam Factory tools will cut through this glue. Available in 4 sizes:Coverage: (Best to squeegee on a thin layer on both sides. A roller applies too much glue)8 oz   = 50 square feet (25 square feet x 2 sides)16 oz = 100 square feet (50 square feet x 2 sides)32 oz = 200 square feet (100 square feet x 2 sides) Instructions for use with XPS: XPS foam (blue and pink board) sometimes has a plastic "skin" on it, and that will have to

Brick In The Yard (@bitymoldsupply) • Instagram photos and videos

Prop Foam 10 is a 40A:100B mix (by weight) polyurethane self-skinning flexible foam that has a free-rise density of 10 lb per cubic foot. Prop Foam 10

Prop Foam 10 Flexible Foam - All Kit Sizes

Ronnie Fieg & Madison Square Garden for New Balance – Kith

[Strong Self Adhesive]: Strong adhesive backing, nonslip and non-degumming, simply stick in place for lasting effects. [High Density Foam Sheet]: Dust

BENECREAT 78x12 Inch Self Adhesive Foam Roll 2mm Thick Dark Gray EVA Foam Sheets with Adhesive Backing for Art Crafts Supplies Halloween Cosplay

Duncan Liquid Fusion Urethane Glue 2oz

Aged Brick - Finished in Scotched Cream

Brick In The Yard (@bitymoldsupply) • Instagram photos and videos

Prop Foam 10 is a 40A:100B mix (by weight) polyurethane self-skinning flexible foam that has a free-rise density of 10 lb per cubic foot. Prop Foam 10

Prop Foam 10 Flexible Foam - All Kit Sizes

My Part Time Job as Dad. Fixing lego foam rubber swords. Cement Glue works well so FAR! Split Apart

Brick in the Yard Mold Supply – brickintheyard

Foam Pieces – BrightCreationsOfficial

Fusion thinBRIK

Liquid Fusion