Inland Kristall 2000s Glass Grinder - for Stained Glass and Fusing

The Kristall 2000s from Inland is a professional piece of glass grinding equipment at a very reasonable price. The Kristall 2000s electric glass grinder has a more powerful motor than the Kristall 1, which eliminates overheating with intensive use in the glass studio.It benefits from a built-in impeller water pump system which feeds water up to the diamond glass grinder head (a 3/4" standard grit is included) without the need for a sponge. You can also benefit from the many compatible attachments and grinder bit designs to enhance your machine's capabilities this model has a worksurface which will take grinder heads up to a diameter of 1" which are available separately.It is extremely important to wear eye protection when using glass grinders. Fill the water reservoir which prevents airborne glass dust and lubricates and cools the diamond glass grinder head, prolonging the life of the diamond surface.It is essential to apply a thin coating of grease (e.g. petroleum jelly or anti-seize lubricant) to the motor shaft before fitting the grinder bit. It is also worth removing the allen screw and inserting some grease into the thread to keep it lubricated and easy to adjust.  Always secure the allen key to the flat side of the shaft, tightening it to the rounded side will scar the shaft and prevent removal of the bit.Start with a piece of scrap glass the first time you grind, to get a feel for the machine and the process. The bit should be lowered and set with 1/8" of diamond coating showing, this can be raised as each 1/8" strip of coating is worn.We recommend that you use an RCD (circuit protector) with this machine and a cap full of grinder coolant in the water to prolong the life of the diamond bit. You can add grinder coolant hereSize :Base: 29cm Wide x 24cm Deep x 17cm TallTop: 27.5com Wide x 22.5cm DeepCheck out our other recommended grinders from Techniglass The Grinder 2 

SecondStory work surface

Stained Glass Grinder for sale

Grinding / Drilling – VS Glass Products

✓ Kristall Grinders, Inland, The Grinder

Glass Design Webáruház

i.ytimg.com/vi/XFdveNyU1SY/hq720.jpg?sqp=-oaymwEhC

Fine 220 Diamond Grinder Bit, 1” (25mm)

Replacement Worksurface (for Kristall 1 Glass Grinder)

Stained Glass - How to use a Glass Grinder

The Power Max II Grinder is the professional grinder at a hobbyist price. Equipped with 1/4-inch and 1-inch Silver Bullet Bits, the Power Max II will

Power Max Glass Grinder with 1/4-Inch and 1-Inch Grinder Bits and Accessories, Red

Inland Tools for Stained Glass - Grinders, hand tools and more!