Gloss Metallic Vinyl Wrap - HM - Series – Teckwrap USA

By A Mystery Man Writer

Last updated 14 Jun 2024

Gloss Metallic Vinyl Wrap - HM - Series – Teckwrap USA

Gloss metallic is a car wrapping film designed for full vehicle vinyl wraps, fleet graphics, vinyl graphics, and lettering. truck, boat, and other cool car wraps.

Specifications

Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface).

The thickness of film: 0.13mm
The thickness of film with release liner: 0.29mm

Note: Products that have HD letters in their SKU (product code) are with the plastic release liner (high-gloss films)

Type of film: Pressure sensitive high-grade polymeric vinyl film with air release channels
Colors: Black Cherry Ice, Black gold, Gloss Aubergine, Gloss green-black, Burgundy Black, Olive Green, Sonoma Green, Sherwood green, Gloss coal-black, Gloss mocha latte, Gloss electric blue, Gloss cornflower blue, Gloss beige linen

Series: 190 series

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 5 years when followed rules of application and use
Outdoor life: 3 years when followed rules of application and use (Zone 1)
Post heating: 100 Celsius
Surface gloss (CD): 14.5% (Test method: ASTM D523-99 60 d.angle)

Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02)

Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02)

Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02)

Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production)

Install tips:

Temperature: from +17°С to +25°С, usage from -55°С to +65°С
Tools: Standard squeegee with a soft buffer
Conformability: smooth and medium curved surface
Directional: yes
Overlap width: 3-4mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.

Specifications Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface). The thickness of film: 0.13mmThe thickness of film with release liner: 0.29mm Note: Products that have HD letters in their SKU (product code) are with the plastic release liner (high-gloss films)Type of film: Pressure sensitive high-grade polymeric vinyl film with air release channels Colors: Black Cherry Ice, Black gold, Gloss Aubergine, Gloss green-black, Burgundy Black, Olive Green, Sonoma Green, Sherwood green, Gloss coal-black, Gloss mocha latte, Gloss electric blue, Gloss cornflower blue, Gloss beige linen Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry placeIndoor life: 5 years when followed rules of application and useOutdoor life: 3 years when followed rules of application and use (Zone 1)Post heating: 100 CelsiusSurface gloss (CD): 14.5% (Test method: ASTM D523-99 60 d.angle) Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02) Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02) Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02) Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production) Install tips: Temperature: from +17°С to +25°С, usage from -55°С to +65°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: yesOverlap width: 3-4mm Package: Roll width 152 cm, length 18 m, weight 13 kg Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application, or during a day in and out use. The scratching of the film is not covered by the warranty.