Halder Supercraft 1 3/4 lb Dead Blow Mallet

Soft Face hammers and replacement faces available in a wide range of sizes at The Hammer Source!
H3377.040Halder Supercraft Mallets, Made in Germany The housing is made from reinforced tubular steel and filled with steel shot for a satisfying non-rebound effect. Significant, double-weld over-strike protection at neck helps reduce handle breakage.Tubular steel handle with ergonomic rubber grip. Heads are lathed from extruded rods of nylon (Polyamide 6, Natural, 65 Shore D +/- 5) with a press fit design.Suggested uses: Automobile assembly and repair work, positioning of work pieces in the vice, tent and hall construction, car body work, repair and maintenance work, straightening work, housing assembly, assembly of sharp-edged work pieces, joining of work pieces, sheet-metal working. Face diameter: 40mm (1.57 inches), Head length 4 1/2 inches, Tool length 11 3/4 inches.Replacement tip is H3508.040

The Halder Supercraft is the finest dead blow, non-rebounding hammer on the market. It features a steel housing containing steel shot to produce the non- rebounding action. This allows the user to hit materials very hard but use much less effort to do so thus making it easier on the arms, shoulders, back and joints. The Supercraft dead blow hammer features two replaceable hard nylon faces giving you double the hitting area.

Halder 3377.060 Supercraft 3 lb Dead Blow Hammer, Steel Handle

H3366.080 Halder Supercraft 7 lb Dead Blow Mallet, 3.1 inch face diameter, 15 inch tool length, wood handle.Halder Supercraft Mallets Made in Germany.

Halder Supercraft 7 lb Dead Blow Mallet, 3.1 inch face diameter, 15 inch tool length, wood handle.

Halder Supercraft Dead Blow, Non-Rebounding Hammer with Nylon Face Inserts and Steel Housing, 1.57 / 28.4 oz.

新作・人気アイテム Dead Blow Hammer， 62 oz.， 12-3/4

Halder USA - Supercraft Dead Blow (3366.02), White, 20mm: : Tools & Home Improvement

The Halder Supercraft is the finest dead blow, non-rebounding hammer on the market. It features a steel housing containing steel shot to produce the non-rebounding action. This allows the user to hit materials very hard but use much less effort to do so thus making it easier on the arms, shoulders, back and joints. The Supercraft dead blow hammer features two replaceable hard nylon faces giving you double the hitting area.

Halder 3366.050 Supercraft 2 lb Dead Blow Hammer Hickory Handle

Non-rebound, for extra powerful strikes. Noise-dampening and gentle on the joints. Inserts made of special nylon with maximum strength. Completely

Halder USA - Supercraft Dead Blow (3366.02), White, 20mm

Halder Supercraft Dead Blow, Non-Rebounding Light Duty Sledge Hammer with Nylon Face Inserts and Steel Housing, 3.15 / 126.99 oz.

Supercraft Halder 2.5 lb. Dead-Blow Hammer with Steel Handle Rubber Grip and Replaceable Nylon Face Inserts 3377.150 - The Home Depot

Halder Supercraft 1 3/4 lb Dead Blow Mallet

Halder Dead Blow Hammers