20 oz Straight MATTE Sublimation ready skinny tumbler RTS, MATTE subli – ACC Sublimation Blanks & Designs

Skinny MATTE tumbler for sublimation. White. No gloss. These are the straight version, no taper. 20 oz straight skinny metal tumbler. Includes lid and metal straw. (rubber bottom sold separately if desired) MATTE white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convecti
Skinny MATTE tumbler for sublimation. White. No gloss. These are the straight version, no taper. 20 oz straight skinny metal tumbler. Includes lid and metal straw. (rubber bottom sold separately if desired) MATTE white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as rubber bottoms and straw cleaning brushes are also available in a separate listing. ***Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations. Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides. *Tumbler Press* (Equipment settings and functions may vary. These settings are on our Elite Pro Max tumbler press offered in the shop)              Press at 360°F for 60 seconds, then turn the tumbler halfway and press again for another 60 seconds. If the design is darker, an additional few seconds may be required. Remove transfer and let cool. *Convection Oven* (Equipment settings will vary!)Apply shrink wrap using a heat gun to shrink it tight to the tumbler. Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!Remove from oven and immediately remove shrink wrap and transfer. TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.

Newest Items – tagged tumblers for sublimation – ACC Sublimation Blanks & Designs

Kid's/youth tumbler for sublimation. Shimmer white. These are the completely straight version., Includes lid and straw in your choice of color. 12 oz,

KID/Youth STRAIGHT Sublimation ready tumbler RTS

20 oz STRAIGHT Sublimation ready skinny tumbler RTS – ACC Sublimation Blanks & Designs

20oz Sublimation Tumbler Matte Or Glossy – Vinyl Fun

These high grade, coated sublimation 20oz Skinny Tumbler blanks are designed to provide a clean transfer with vivid colors and a long life. Each Tumbler includes a lid, metal straw, and straw cleaning brush.

ProSub 20oz Straight Skinny Tumbler Sublimation Blanks - Matte White

Kid's/youth tumbler for sublimation. Shimmer white. These are the completely straight version., Includes lid and straw in your choice of color. 12 oz,

KID/Youth STRAIGHT Sublimation ready tumbler RTS

Skinny tumbler for sublimation. White. These are the straight version, no taper., 20 oz straight skinny metal tumbler. Includes lid and metal straw.

20 oz STRAIGHT Sublimation ready skinny tumbler RTS

skinny tumbler,sublimation sippy cups wholesale,matte tumbler，matte finish

GREAT DIY GIFT: The straight tumblers sublimation set includes 24 tumbler for sublimation, 24 straws, 24 straw brushes and 24 shrink wrap. You can diy a great gift for your family, friends, besties, sisters, coworkers.

Draheri 24 Pack Sublimation Tumblers Bulk 20 oz Skinny Straight, Sublimation Blanks Double Wall Stainless Steel Skinny Tumbler with Lid