Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method

These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. Also with 4 different sized dies. Die 1 is approximately 1.4 at the top and 1.15 at the bottom. Die 2 is 1.3 at top and 1.05 at bottom. Die 3 is 1.2 at top and .95 at bottom. Die 4 is 1.1 at top and .85 at bottom. SW dies are 1-1/8 tall. These dies are hardened and the inside of the die is polished very smooth.

Part 1 : Swedish Wrap Dies Set with brass push rods - Coin Ring Making

Part 2 : Swedish Wrap Die Set with brass push rods - Coin Ring Making

THE ORIGINAL Master Swede Kit – Coin Ring Tools & Custom Made Coin Rings – Jason's Works

4 Degrees Wall Straightening Set for Coin Rings

5 Wavy Ring Shaping Press : Round Hoop Waves Wavy Jewellery Dapping Doming Block Tool (774) : : Home

Swedish Wrap Die Set (3 dies, 6 double sided push rods) – Legacy Brand Coin Ring Tools

One .6 x .9 Swedish Wrap Kit for Quarter and Dime Sized Coins and the Smallest Possible Coin Rings and Coin Beads – Coin Ring Tools & Custom Made Coin Rings – Jason's Works

Made in the USA

Coin Ring Punch and Spacer Set, Punch a Hole in a Coin, Jewelry Making Tools, 5 Punches Coin Ring Making Tool

Coin Ring Punch and Spacer Set, Punch a Hole in a Coin

Swedish Wrap Die Set (3 pcs.) with Aluminum Plungers (6 Push