Square Silicone Tray Mold - LARGE – LOLIVEFE, LLC

By A Mystery Man Writer

Last updated 12 May 2024

Square Silicone Tray Mold - LARGE – LOLIVEFE, LLC

This 10.25" square tray mold is perfect for creating custom art pieces or large resin trays. It measures .5" deep. Use with our resin shaping balls to give a flip to one or more of the corners, or check out our beautiful handles to give your tray a more finished look. And like most of our products, this mold is BPA fre

This 10.25 square tray mold is perfect for creating custom art pieces or large resin trays. It measures .5 deep.

Use with our resin shaping balls to give a flip to one or more of the corners, or check out our beautiful handles to give your tray a more finished look.

And like most of our products, this mold is BPA free and non toxic. It's flexible, soft and heat resistant from -40 to +446 degrees Fahrenheit, (-40 to +230 degrees Celsius).

This mold takes up to 24 fluid ounces of resin (you can use less if you don’t want the tray to be that thick - our preference is between 20 and 22 fluid ounces of resin).

Tips (always follow instructions for the resin you are using - these are meant as general guidelines):

Always pour your resin into the hardener (pour hardener into the mixing container first, then resin).
Stir resin with a plastic or silicone stirring stick to reduce air bubbles. Wood is not recommended as it can create air bubbles.
Let resin sit a few minutes after stirring to reduce air bubbles.
Don’t use a torch or heat gun as it could damage the molds and make it difficult to de-mould, causing them to tear - this is especially true near the edges.
Wash mold as needed in warm soapy water.