Mr. Mark Setter NEO (40 ml)

By A Mystery Man Writer

Last updated 07 Jun 2024

Buy Mr. Mark Setter NEO (40 ml) MS234 from Mr. Hobby (GSI Creos) in 1/48 scale.
Mr. Mark Setter NEO (40 ml) Mr Hobby, Mr Mark Setter Neo decal solution is ideal to set decals into place when they are being applied to curves or irregular surfaces. We recommend that you use both Mr Mark Setter and Mr Mark Softer when working with decals. Mr Mark Setter should be applied to the surface where the decal is to be applied to help the decal stick to the surface. Once dry Mr Mark Softer should then be applied to the top of the decal. To help the decal to conform to things like panel line and rivets. Leave the decal for a few hours to comply dry. Contains water, ester compound, polyvinyl acetate, polyvinyl alcohol, acetate Instructions: Avoid contact with skin. Wear appropriate protective equipment (protective gloves, eye/face mask, apron and long sleeved clothes) when handling a spill of this product. After use, wash hands and gargle mouth thoroughly. Do not use it except for the specified usage. Content should be used up before disposal of the container. Container/content should be disposed of in accordance with local, regional and national regulation. FIRST AID If inhaled: Remove to fresh air and keep at rest in a position comfortable for breathing. If on skin: Flush exposed area with water. If you feel unwell, get medical advice. If skin irritation occurs, get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. If eye irritation persists, get medical attention/advice. If swallowed: Rinse mouth. Do not induce vomiting as this may increase the risk of aspiration of the liquid into the lungs causing chemical pneumonitis. If you feel unwell, get medical attention/advice. By Mr. Hobby (GSI Creos)