PPS Disposable Lids and Liners

PPS Disposable Lids and Liners Disposable
These are the disposable components of the PPS paint spray system.
They are the only components in the PPS disposable cup system that contact the paint.

Each kit contains disposable lids with built-in filters, disposable cup liners, and lid sealing plugs. We recommend choosing kits with 200 micron filters for use with traditional solvent-based paint or primer applications.
Reusable graduated mixing film inserts are available for each size of cup. Use of film inserts is recommended to avoid the wastage of using a separate mixing cup, in addition to the spray cup.
The beauty of the PPS system is that you can mix, stir, strain, and spray from the same cup.
Note: mix ratio film inserts are sold separately; see Related Products, below.

The 3M Paint Preparation System (PPS) replaces traditional paint mixing cups and strainers.
Instead, the PPS uses a rigid cup and collar which hold a disposable lid and liner (containing an integral strainer/filter).
The single-use liners and lids drastically reduce the amount of solvent and time required for cleanup, since only the gun and adapter need cleaning. The cup is mounted on the spray gun using a 3M PPS adapter. The unique design allows the spray gun to function at any angle. Adapters are available to convert all major spray guns. There are four sizes of cups and liners from 6 oz to 32 oz.

• Designed for gravity feed or traditional siphon spray gun systems
• Eliminates the need for separate mixing cups and filters
• Offers up to 70% reduction in solvent use for gun and parts cleaning
• Dramatic savings in labor hours previously lost cleaning cups and pots
• Reduced hazardous waste generated by equipment cleaning
• Virtually any spray gun can be adapted to the PPS paint cup system; for the appropriate adaptor for your spray gun, please contact one of our Fisheries Supply 3M specialists

3M PPS Kit, Large, 16024

PPS Paint Preparation System Series 2.0 Spray Cup System Kit - Mini, Cup, Lids with 125 Micron Filters, Liners, Plugs 3M

3M™ PPS™ Lid & Liner Dispenser

3M™ PPS™ Series 2.0 12-Pack Refill Kit

Lid & Liner Kits contain 25 disposable lids with welded-in filters to strain paint material while spraying, along with corresponding liners and

Fits 3M PPS 1.0 Replacement Lids & Liners (3315)

3M 16028 - PPS Lids & Liners, 3 oz Size, Full Diameter 200 Micron Filter - 50 pack - FREE SHIPPING

3M - 16000 PPS Standard Size Kit with 200 Micron Filters –

Disposable Spray Gun Cup, Disposable Paint Cup, Paint Spray Gun Cup

PPS Mini and Micro Red Liner Dispenser (16298) by 3M. PPS Lid & Liner Dispenser is a wall-mountable unit that makes supplies such as lids and liners for the 3M PPS (Legacy) paint preparation system readily available. This storage accessory conveniently dispenses supplies one at a time, while keeping the remaining supply clean and safe from contamination.

3M 16298 PPS Lid & Liner Dispenser Mini & Micro

Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360掳, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.

3M Mini PPS Lids & Liners Kit, 200mu, Pack of 50

3M PPS (Original Series) Paint Spray Gun Cup Lids and Liners Kit, 16114, Mini, 6 oz, 200-micron Filter, Use w/ Paint Gun for Cars, Furniture, Home, 50 Disposable Lids and Liners, 20