Camouflage EasyPeel Spray Paint Cerakote Camo Gun Model Stencils RC Mask 8 PACK

By A Mystery Man Writer

Last updated 10 May 2024

Arrives by Sat, Feb 3 Buy Camouflage EasyPeel Spray Paint Cerakote Camo Gun Model Stencils RC Mask 8 PACK at
Acid Tactical® Camouflage Easy Peel Adhesive Stencils

8 DESIGN COMBO PACK

CERAMIC / Reptile Skin / Multicam / Dragon Cam
Holey Rock / Frog Spawn / Warped Honeycolm / Torn Streaks

Easy Peel - Stick on, Paint, Peel Off
9x14 Sheets - Read product description for full details.
8 stencils as shown in our main image.
Designed for use on Rifles, Shotguns, Pistols, Models, RC Cars & Planes, ATV's, Trucks, etc..
Can be used on Plastic, Metal, Wood.
.25mm Vinyl Sheets - Peel off, stick on Stencils)

Can be used with all types of paints including; Airbrush, Rattle can, Duracoat, Cerakote, water, and oil based paints.

Acid Tactical ADHESIVE camo stencils. Our stencils will not leave sticky glue residue behind. They were designed to remove cleanly and not effect the paint.

For use with airbrush, spray, gun coatings, duracoat, cerakote, and other spray paints.

Stencils are heat resistant on both metal and polymers. They do not shrink on ABS and Polymers when flash curing like the yellow avery paper. They leave little to no adhesive behind so no messy clean up.

What you get.

8 - 9x14 Sheets

Each sheet is a unique design.

Specifications:

Material: High Temp Vinyl film
Thickness: .25mm
Length: 14
Width: 9

For angled surfaces: When shaping around corners use larger stickers and allow half of the sticker to lay on each plane. If small sections of the design overlaps a corner it may not adhere well. Use scissors to trim any excess that doesn't want to adhere.

Useful Tools:

Exacto knife - Can be used to remove sticker and also to form sticker in tight angles.
Scissors - To trim excess stencil

STENCILING STEPS:

1. Basecoat your project with a good camouflage color.

2. Clean off the project to remove any dust or paint residue. Paints such as Rustoleum Camo Colors tend to leave a lot of dust behind. Be sure to have clean hands and refrain from touching the adhesive side during application.

3. Apply the stickers to your project. Using a sharp edge such as an exacto knife or razor blade will make it easier to remove and apply the stencils. Paint immediately after applying stickers.

4. After applying the stencils to your project paint directly at the object. Avoid spraying at angles.

5. Allow your project to completely dry before removing the stencil stickers.

6. Apply a clear protective coating to your project.

7. Store Sheets in a cool/dry location. Humidity will cause the sheets to curl. Apply stencils in a low humidityenvironment with temperatures between 65 and 100 degrees F. Ensure your project is at ambient temp.