Phillips 66 - X/C Red Spec Aviation Hydraulic Fluid

By A Mystery Man Writer

Last updated 02 Jun 2024

Phillips 66 - X/C Red Spec Aviation Hydraulic Fluid | MIL-PRF-5606A Features/Benefits Very high viscosity index for use over a wide temperature range Outstanding low-temperature properties Excellent wear protection Resists deposit formation and viscosity increase due to oxidation Protects against rust and corrosion Go

Phillips 66 - X/C Red Spec Aviation Hydraulic Fluid | MIL-PRF-5606A

Features/Benefits

Very high viscosity index for use over a wide temperature range
Outstanding low-temperature properties
Excellent wear protection
Resists deposit formation and viscosity increase due to oxidation
Protects against rust and corrosion
Good foam resistance
Does not contain zinc or other heavy metals
Very high viscosity index for use over a wide temperature range
Outstanding low-temperature properties
Excellent wear protection
Resists deposit formation and viscosity increase due to oxidation
Protects against rust and corrosion
Good foam resistance
Does not contain zinc or other heavy metals

Phillips 66 X/C 5606A Aviation Hydraulic Fluids are mineral oil-based, high viscosity index, ashless (zinc-free) antiwear hydraulic fluids designed to meet the severe demands of aerospace and industrial applications. They have excellent oxidation resistance and outstanding low-temperature properties for use over a wide temperature range. They provide excellent wear protection for hydraulic pumps and motors, protect hydraulic system components against rust and corrosion, and are resistant to excessive foam buildup that can cause poor or sluggish hydraulic system response.

X/C 5606A Aviation Hydraulic Fluid is recommended for use in hydraulic systems that do not require a “super clean” fluid. Both fluids are dyed red for identification and leak detection purposes.

Applications
X/C Aviation Hydraulic Fluids are recommended for use in non-pressurized systems operating between –54°C and 90°C (-65°F to 194°F), and in pressurized systems operating between –54°C and 135°C (-65°F to 275°F) at pressures up to 3,000 psi. (1)

Typical applications include:

Aircraft and missile control systems, autopilots, and shock absorbers
Auto wreckers, boom trucks, and electrical service equipment (cherry pickers) where all-weather performance is required
Industrial robotics

X/C 5606A Aviation Hydraulic Fluid meets the requirements of:

U.S. Military Specification MIL-H-5606A (obsolete)

(1) Note: Do not use these products in hydraulic systems with natural rubber elastomers.

Phillips 66 X/C 5606A Aviation Hydaulic Fluid - 1 gal Bottle: Industrial Lubricants: : Industrial & Scientific

A mineral oil-based, ashless (zinc-free) antiwear hydraulic fluid specially formulated for use over a wide temperature range. It has outstanding low-temperature properties, a very high viscosity index, and is fortified to provide excellent oxidation resistance and wear protection. It is dyed red for identification and leak detection purposes. Meets the requirements of U.S. Military MIL-H-5606A. Recommended for use in aviation and non-aviation hydraulic systems with synthetic rubber components.