QU90008 Gear Marking Compound

Buy Now QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears.
QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears. Contents net wt. 3g. USA Made. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Best Results  To Apply Wear Gloves  California Proposition 65 MSDS Matching Parts Applications Tech Note 1: Best Results For best results, there must be some resistance applied to the differential and ring gear as you turn the pinion gear. For a rear axle, you can install the axle shafts and brake drums and lightly apply the parking brakes. For front axles, put a wrench on a ring gear bolt and apply pressure against the rotation of the gear. Tech Note 2: To ApplyBrush the Gear Marking Compound on both sides of several ring gear teeth. Rotate the pinion gear so it turns the ring gear several times in both directions. Check the contact pattern with the desired pattern show in a service manual or installation instructions specifically intended for the gear set you are using. Tech Note 3: Wear GlovesWear gloves when using Gear Marking Compound. Tech Note 4: California Proposition 65This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. (source MSDS dated 4/17/2018) Tech Note 5: MSDSMSDS Tech Note 6: Matching PartsQT9404 Application BrushQU90009 Universal Axle Service Pack Applications:  Universal for all Axle Gear Sets

Qu90009 Universal Axle Service Pack - QU90009 Universal Axle Service Pack is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.

Qu90009 Universal Axle Service Pack

ACDelco GM Original Equipment 10-5055 Gear Marking

Axle Service Pack with Threadlocker, Gear Marking Compound QU90009

QU50248 Differential Parts Kit for 2003-2006 Ram AAM 925 Front Axles

Qu50581 Dana 50 Differential Bearing and Seal Kit

ACDelco GM Original Equipment 10-5055 Gear Marking

16 oz. Yellow Gear Marking Compound Grease - Ring & Pinion Gears

is a good used factory 3.54 ratio gear set. 3.54 ratio Dana 50 axles were made from 1980-1997. Ring gear tooth count is 46, pinion gear tooth

QU20274U Used 3.54 Ratio Dana 50 Ring and Pinion Set

QU11108 AAM 9-1/4 Axle Left Hand Thread Ring Gear Bolt for GM

Genuine GM Fluid 1052351 Gear Marking Compound - 1 oz

4 oz. Yellow Gear Marking Compound Grease - Ring & Pinion Gears

is a brand new Dana 3.73 ratio gear set. 3.73 ratio Dana 50 axles were made from 1999-2005. Ring gear tooth count is 41, pinion gear tooth count

QU20236U Used 3.73 Ratio Dana 50 Ring and Pinion Set

Ring and Pinion Marking Fluid, Mopar Replacement Gear Marking Compounds, Each

Mopar Replacement Gear Marking Compounds

TK4885 Premium Dana 50 Differential & Pinion Timken Bearing Only Kit

Dodge Ram Front Axle Service 2003-2013