Copper Tubing - Refrigerant Coupling Systems, Inc.

Copper is C12200, Seamless, Light Drawn (H55), Type L, ACR/MED bendable quality tubing, conforming to ASTM B75. The copper tube meets dimensional, chemical, mechanical strength, cleanliness, and eddy current testing requirements of ASTM B280 and ASTM B819 as applicable. Light drawn (H55) tubing is a bendable quality tube in straight lengths, approved for field bending without annealing. Tube ends are sealed with plugs to maintain cleanliness. Allowable strength per ASME B31.5-2016 Table 502.3.1 APPLICATION High Pressure HVAC/R ALLOWABLE STRENGTH* 10,300 psi (10.3 ksi) at 250⁰F per ASM B31.5-2016 when used with mechanically attached fittings. STANDARDS ASTM B75, ASTM B280, and ASTM B819 REFRIGERANTS All CFC, HCFC, HFC, HFO, and class A2L refrigerants and refrigeration oils. The tubing is suitable for use with R744 (CO2) when used within the design pressure rating. The tubing is not suitable for use with ammonia (R 717) or Methyl Chloride (R40) refrigerants. INSTALLATION The tubing must be installed by skilled installers, trained in the application and installation of H55 (half hard) temper copper tubing and RCS fittings. DATA SHEET Click to download INSTRUCTIONS (CLICK HERE)

Copper Refrigerant Piping Service 5mm-150mm od, For

Othmro 1Pcs Refrigeration Tubing, Outer Diameter 3mm Thickness 0.5mm Length 1.5m Soft Coil Copper Tubing Copper Tube Pipe Air Conditioner Copper

Sold Individually Couplings join straight lengths of tubing Coupling Includes Rolled Stop For use with 3/4 OD Copper Tube (HVAC) For use with 5/8 ID

HVAC Wrot Copper Slip Coupling with Rolled Stop, 3/4 in. x 3/4 in. OD, 5/8 in Nominal (ID), C x C - W01028

Copper pipe fittings are used to connect pipe components of copper pipes, soldering to connect. It is widely used in jointing copper pipes. Mainly for

MECCANIXITY Tee Y Type Copper Fitting Welding Joint Split Union Intersection 22mm or 7/8 Inch ID for Water Pipe Plumbing, HVAC, Refrigeration System

7/8 to 3/4 Copper Fitting Reducer Coupling - CFW01035

Copper Brass Coupling Reducer Connector Elbow Water Pipe

Copper Tubing - Refrigerant Coupling Systems, Inc.

Copper tubing - Wikipedia

Hvac & refrigeration tubing is measured by the outside diameter or OD of the pipe/tube. See description below for more details. Change your pipeline

Copper Fitting 1/2 to 3/8 (HVAC Dimensions) Reducer/Increaser Copper Coupling & HVAC – 3/8 to 1/4 (Plumbing Inner Dimensions) 99.9% Pure Copper - 5

Copper pipe fittings are used to connect pipe components of copper pipes, soldering to connect. It is widely used in jointing copper pipes. Mainly for

MECCANIXITY Tee Y Type Copper Fitting Welding Joint Split Union Intersection 22mm or 7/8 Inch ID for Water Pipe Plumbing, HVAC, Refrigeration System

1-3/8'' 20 ft. Straight Copper ACR Tubing - Wallington Plumbing

CO2 Copper Fittings - R744

CO2 Copper Fittings - R744

Copper Tube - Refrig Quality - 1/2 (12.7 x 0.81) - R410A - Airefrig