Light Purple Dynamic Plastisol Screen Printing Ink – Lawson Screen & Digital Products

By A Mystery Man Writer

Last updated 01 Jun 2024

Light Purple Dynamic Plastisol Screen Printing Ink – Lawson Screen & Digital Products

Light Purple DI 602 Low-Cure Plastisol Ink is a smooth & creamy plastisol ink that works great on tri-blends, cotton, and 50/50. Variety of colors. Ships FREE
Light Purple DI - 602 | Low-Cure Plastisol Ink Dynamic Ink Light Purple DI-200 RFU (Ready for Use) is one of the premier plastisol screen printing inks for manual and automatic screen printing machines. It offers good opacity for printing on 50/50s, blends and cotton t-shirts. This DI ink is a low cure ink, curing at 270 - 280 degrees. Dynamic Ink RFU plastisol ink has bold and vibrant colors and a soft hand print. It is creamy out of the bucket so you can go on-press quickly.All Dynamic Ink flashes quick so you can speed up production when printing a white under base. You can also print-flash-print, or print wet-on-wet, depending on your screen print job. For better bleed resistance, use our DI-1550 LB Plus White or any of our Dynamic Ink Low-Bleed (LB) Series plastisol inks.All of the inks in the Dynamic Series are non-phthalate and lead-free. The Dynamic series offers some of the most vibrant colors and an easy to print creaminess plastisol ink right from the bucket. The high opacity helps all screen printers achieve a better print with a great feel/hand. Curing Instructions:Flash at approximately 220 degrees for about 3 - 5 seconds and cure at 270 - 280.Clean Up and On-Press Color Changes:Use a press wash for on-press colors changes and an ink degradant when removing the ink. The stencil can then be saved or you can reclaim the entire screen printing frame.Storage Information:Store are room temperature and avoid direct sunlight. Best to use within one year of manufacturing date. Features & Tips for Optimal Results Pantone 2665C Finish: Semi-Gloss Stencils: All Types of direct emulsion or capillary film can be used Opacity: Semi-Opaque Wash-Up: Use Thinner DT or any conventional plastisol wash-up system Bleed Resistance: Fair-GoodStorage: Store in a relatively cool area. Keep away from extreme heat and direct sun penetration. Store below 95℉ Ink Build-Up on Screen: MinimalMileage: Excellent. Approximately 800-1,750 sq. ft. per gallon Drying: 270℉ - 280℉ Fabrics: All types. For soft-hand coverage, use 196 to 305 monofilament Always pretest before use to establish suitability and procedures prior to production. Stir plastisols prior to each use. Do not dry clean or use bleach, or direct iron.

Screen Printing Equipment and Accessories – Lawson Screen

Screen Printing Equipment & Supplies, DTF and DTG Equipment

Dynamic Plastisol Ink Standard Fluorescent

Lightning Fast Cure - Cure your prints in just over a minute! With our Rapid Cure Plastisol Inks. Rapid Cure Plastisol Inks cure as low as 270°F

Rapid Cure® Fluorescent Purple Screen Printing Ink (8oz.) - Plastisol Ink for Screen Printing Fabric - Low Temperature Curing Plastisol by Screen

Our Rapid Cure Inks Cure as low as 270F for the best energy savings dye blocking scorching prevention and shrink prevention Creamy Bold Formula Plastisol Rapid Cure Inks have a High Opacity - Develop Color Quicker on the Press. Shades may vary due to the color and resolution of your computer screen and/or your particular color printer output. Buy Direct This ink works great and wont break the bank. Formulated and designed by printers for printers.