Slide 40510P Econo-Spray® No.1 Mold Release

Slide 40510P Econo-Spray® No.1 Mold Release. Food-grade for indirect food contact (†), Non-paintable silicone, Max ops temp: 600°F/315°C, No chlorinated solvents
Slide 40510 Econo-Spray® 1  Slide 40510 Econo-Spray® No.1 mold release contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. Maximum operating temperature 315°c (600°F) Slide 40510 MSDS Available from the attachments tab along with instructional videos. NOTE: Slide Products are developed for plastics processors and fabricators, including mold and tool builders or MRO applications in general industry. They are not formulated for home use. These products will not be shipped to a residential address and are not intended as retail products.

Slide Products – Power Modules Inc.

SLIDE® Urethane Mold Release No. 45812H

Release Agents - Lubricants In Stock

*Bulk orders of 95 lbs and above (7 aerosol cases and above) must request a quote at checkout in order to receive freight shipping rates and

Silicone Mold Release No. 40112

Mold Releases – Bluewater Heater

Mold Release, Mold Cleaner, Rust Prevention Free Samples

Some products have limited compatibility and should only be used on select materials. The Slide Econo-Spray 1 clear mold release agent is compatible

Slide Econo-Spray 1 Clear Mold Release Agent - 10 oz Aerosol Can - Food Grade - 40510

Mold Release Agent Slide Econo Spray Silicone Base 10 Oz Spray Can

Slide Products - Thermal-Tech Systems, Inc.

Slide Products - Thermal-Tech Systems, Inc.

SLIDE® Pure Eze Mold Release No. 45712N

Econo-Spray® 1 contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent

40510P - Econo-Spray 1 Release Aerosol (16 ounce aerosol, 12 per cs)

Slide Products Mold Release Agents

Demag Injection Molding 1-3-4 in Mica Barrel Band Heaters 44mm x 76mm

Econo-Spray® mold cleaner quickly removes silicones, grease, oil and wax build-up on mold surfaces. It is also good for clean-up of non-operating

45612 - Econo-Spray Mold Cleaner Aerosol (16 ounce aerosol, 12 per cs)