Smooth-On Mold Star 16 FAST - Platinum Cure Molding Silicone

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star 16 FAST is a faster material with a 6 minute pot life and 30 minute cure time. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450 F (232 C) and is suitable for casting low-temperature melt metal alloys. Each kit contains 1 pint of part A and 1 pint of part B Note: THI-VEX is NOT compatible with Mold Star

Mold Star™ 16 FAST – 2kg - AMT Composites

SSC - Canadian Smooth-On Distributor - Mold Making and Casting

Smooth-On Mold Star 16 FAST - Platinum Cure Molding Silicone

Platinum Silicone Mold Making Rubber: Request for a Deep Dive on

Smooth-On Mold Star 16 FAST - Platinum Cure Molding Silicone

Mold Star™ rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones feature

Smooth-On Mold Star 16 FAST, Trial Set

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star 16 FAST is a fast material with a 6 minute pot life and 30 minute cure time.

Smooth-On Mold Star 16 Fast - 1a:1b Mix by Volume Platinum Silicone Rubber - Gallon Unit

Smooth-On Mold Star 16 Fast

Meanderings of a Maine Artist sculptor Cynthia Smith - C.V.

PoYo™ Putty 40 Product Information Smooth-On

Smooth-On Pourable Mold Making Silicone Rubber