Smooth-On Plasti-Paste II

New and improved Plasti-Paste II is a harder, drier, and more paintable version of the original Plasti-Paste.
New and improved PlastiPaste II is a harder drier and more paintable version of the original PlastiPaste Easy to handle and easy to control PlastiPaste II doesnt exude oil and it can be sanded drilled and painted with primer and/or acrylic paints when cured making it suitable as a mother mold material or as a fabrication material Used in the same way as the original PlastiPaste PlastiPaste II has a mix ratio of 1A:2B by volume with a working time of 10 minutes and a handling time of 90 minutes at room temperature (depending on mass) PlastiPaste II is dimensionally stable and heatresistant up to 130F/55C (158F/70C after curing) It bonds to itself permanently so more can be added at any time as long as the cured plastic surface is clean PlastiPaste II is odorfree and mercuryfree

Plasti-Paste II - Trowelable Plastic Paste - Gallon Unit : Arts, Crafts & Sewing

SILICONE - ecoflex - ecoflex

Plasti-Paste™ II Product Information

Plasti-Paste™ EPOXY, Fiber Filled Trowelable Epoxy

Using Plasti-Paste™ EPOXY to Make a Support Shell for a Brush On Silicone Rubber Mold

Carbon Fiber Tablet Mount - the Kindle Kradle : 15 Steps (with Pictures) - Instructables

Plasti Paste II Pint Kit (1.55kg)

Plasti-Paste II Mould Reinforcement – ResinCraft

N95 – Jay Rosen Design

Carbon Fiber Tablet Mount - the Kindle Kradle : 15 Steps (with Pictures) - Instructables

Plasti-Paste™ EPOXY is an epoxy-based version of Smooth-On’s popular urethane Plasti-Paste™ products. It is a two component, fiber-filled epoxy

Smooth-On Plasti-Paste Epoxy, Trial Set

Plasti-Paste II - Trowelable Plastic Paste - Gallon Unit : Arts, Crafts & Sewing

Smooth-On epoksidinis glaistas - Plasti-Paste EPOXY – UAB, Silforma