2 oz. SteelStik Steel-Reinforced Epoxy Putty Stick (Case of 6)

By A Mystery Man Writer

Last updated 16 Jun 2024

J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty

KwikWeld Professional is a professional-sized version of our fast setting KwikWeld two-part epoxy cold weld system. It provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours.

10oz J-B Kwik Weld Epoxy

Best Metal to metal adhesive? : r/crafts

PC Products PC-Plumbing 2 oz. Putty Epoxy (4-Pack) 24591 - The

PC-Plumbing is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Plumbing is NSF rated safe for contact with potable water. PC-Plumbing can be applied to wet and dry surfaces. Cut, mix and apply. PC-Plumbing allows a working time of about 3 minutes and cures for service in 60 minutes. PC-Plumbing will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of uses in thousands of combination. Cures wet or dry.

4 oz. PC-Plumbing Putty Epoxy 045596

J-B Weld is a hand kneadable, steel-reinforced epoxy putty adhesive/sealant that will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or gasoline! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure in 20-30 minutes and can be drilled, sanded, filed, tapped, machined, and painted.

J-B Weld 8267 2-oz. Steel-Reinforced Epoxy Putty Adhesive/Sealant

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted.

J-B Weld 8297 High Heat Epoxy Putty - 2 oz

Gorilla All purpose epoxy stick is an incredibly strong and versatile epoxy putty. The hand-mixable, easy to use epoxy stick sets in just 10 minutes and works on most surfaces. Gorilla all purpose epoxy stick is waterproof, non-rusting and once cured, it can be drilled, sanded, and painted.

Gorilla 2 oz. Epoxy Putty Stick (5-Pack)

Best Metal to metal adhesive? : r/crafts

PC-11 was formulated as a true marine epoxy allowing users to bond to wet dry and fully submerged substrates. PC-11 formulation provides extended working time for large and critical jobs which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids caustics detergents gasoline fuel oil salt and fresh water.