Sublimation phone holder pens – KCSubPlug

Shiny white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking. Shrink wrap is INCLUDED with each pen purchase. The sublimation portion of the pen is 4 3/16 inches long and 1 5/16 around (width)***C

Shiny white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking. Shrink wrap is INCLUDED with each pen purchase. 

The sublimation portion of the pen is 4 3/16 inches long and 1 5/16 around (width)

***Convection Oven Directions*** 
Unscrew the black tip from the pen and remove the internal pieces. Apply sublimation transfer on the surface of the pen using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the pen, then tape very well along the seam.
Apply shrink wrap using a heat gun to shrink it tight to the pen barrel. Add a strip of heat tape along the perforation of the shrink wrap for easier removal after baking.

Oven settings:
- temperature - 350-375 degrees F
- dwell time - 5-6 minutes (depending on the wrap and oven type)
- mug wrap pressure - light to medium **If your pen is touching a metal surface during baking, the shrink wrap will be more likely to melt!

Remove from oven and immediately remove shrink wrap and transfer. PEN WILL BE HOT!! No sealant is necessary on sublimation items.
PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.

AMPS Drill Base Mount, 7 Modular Arm, Phone Holder

Unisub® Fall Blanks – Blended Customs

Products – KCSubPlug

Round Mobile Phone Ring Holder for Sublimation

Sublimation Phone Grips Blank

New Design Cell Phone Stand Sublimation Phone Holder MDF Wooden Personalized - China Sublimation Holder Stand and Sublimation Phone Holders price

Sublimation Phone Grip

Sublimation phone ring holder and stand - Black – SubliBlanks Limited

Sublimation Blanks Phone Grip Holder, Major Sublimation

Round Mobile Phone Ring Holder for Sublimation

Phone Holder, Spring Loaded Grip

Package includes: Packaging - 10 sublimation pens blank + 20 pieces of heat shrinkable film + 1 roll of heat transfer tape. According to your

TAIKUU 久の物 10 Pack Sublimation Pens Blank, Heat Transfer Pen, Mobile Phone Stand Sublimation for Full Printing Ballpoint Pen Sublimation,DIY Office

Sublimation Phone Grips Blank

Weewooday 10 Piece Sublimation Blanks Phone Case, 5 Piece Phone Covers with 5 Piece Blank Sublimation Phone Holders for DIY Sublimation Rubber Slim Case, Black (Compatible with Apple iPhone 12/12 Pro)