Milliput Superfine White Epoxy Putty Fossil Reconstruction – ZOIC PalaeoTech Limited
By A Mystery Man Writer
Last updated 26 May 2024
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. It can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics.
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. It can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. Modelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). Milliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).You can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. Like epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. It can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. Modelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). Milliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer). You can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. Like epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. It can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. Modelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). Milliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).You can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. Like epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. It can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. Modelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). Milliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer). You can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. Like epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.
Milliput - White
Milliput - Plumbers Putty - Porcelain Repair Kit - Superfine White Epoxy Putty 2 Pack with Gloves - Fiberglass Bathtub Chip and Ceramic Tile Repair
Fossil Preparation Consolidants & Adhesives – Tagged Consolidants
Milliput Superfine White putty
Milliput® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as
Milliput Superfine White Epoxy Putty
Superfine Grain Milliput, 4 oz. - Hobby Modeling Adhesives
Superfine White Milliput - Specially formulated for the restoration of porcelain and ceramics
Milliput - Plumbers Putty - Porcelain Repair Kit - Superfine White Epoxy Putty 2 Pack with Gloves - Fiberglass Bathtub Chip and Ceramic Tile Repair Kit, Cracked Sink, Tub and Tile Refinishing
4oz. Package of Superfine White Two Part Epoxy .
Milliput Superfine White Two Part Epoxy Putty
Milliput - Plumbers Putty - Porcelain Repair Kit - Superfine White Epoxy Putty 2 Pack with Gloves - Fiberglass Bathtub Chip and Ceramic Tile Repair
Milliput - Plumbers Putty - Porcelain Repair Kit - Superfine White Epoxy Putty 2 Pack with Gloves - Fiberglass Bathtub Chip and Ceramic Tile Repair Kit, Cracked Sink, Tub and Tile Refinishing
In the pack:1 x Yellow-Grey 1 x Black 1 x Superfine White1 x Silver Grey1 x TerracottaMilliput® is a two-part epoxy putty that adheres exceptionally
Milliput Bumper Pack (5 colours)
Milliput - Plumbers Putty - Porcelain Repair Kit - Superfine White Epoxy Putty 2 Pack with Gloves - Fiberglass Bathtub Chip and Ceramic Tile Repair Kit, Cracked Sink, Tub and Tile Refinishing
Recommended for you
-
Milliput Terracotta Epoxy Putty26 May 2024
-
Milliput26 May 2024
-
Milliput - Versatile Epoxy Putty (6 color options) — Atlas Preservation26 May 2024
-
Milliput Super Fine White - Epoxy Putty 4oz (113.4 g) Package - Warhammer 40k26 May 2024
-
Milliput Superfine 2-Part Self Hardening Putty White26 May 2024
-
Proops Milliput Epoxy Putty, Turquoise Blue X 1 Pack. Modelling26 May 2024
-
Milliput EPOXY Putty 2-Stick Pack 113g (4oz) Terracotta26 May 2024
-
Proops Milliput Epoxy Putty, Superfine White X 2 Packs. Modelling26 May 2024
-
Proops Milliput Epoxy Putty, Black X 3 Packs. Modelling, Sculpture, Ceramics, Slate Repairs. x1019b Free UK Postage26 May 2024
-
Proops Milliput Epoxy Putty, Superfine White X 5 Packs. Modelling, Sculpture, Ceramics, Slate Repairs. x1018d Free UK Postage26 May 2024
You may also like
-
30Pcs Ear Corrector Self Adhesive Women Girls Ear Tape Cosmetic Ear Stickers26 May 2024
-
Harloon 120 Pcs Dry Erase Markers Whiteboard Markers Fine Tip White Board Dry Erase Marker Low Odor Whiteboard Markers Pen 12 Colors Dry Erase Board Markers Dry Erase Pens for26 May 2024
-
JOANN Invests in Glowforge, Bringing Laser Cutting to the Mainstream Crafter - Craft Industry Alliance26 May 2024
-
Caramel Rice Krispie Treat Starfish and Turtles Tutorial26 May 2024
-
UHU Super Glue Ultra Fast Liquid 3g26 May 2024
-
ABN abn tool drawer liner non slip tool box liner - bulk rubber26 May 2024
-
Buy Wholesale wood glue roller Items For Your Business26 May 2024
-
Melissa & Doug Children's Book - Poke-a-Dot: Goodnight, Animals26 May 2024
-
Paint With Me Challenge: July 2020 Loose Watercolor Blue Sky Ocean Waves Landscape26 May 2024
-
28 Most Beautiful Crochet Flower Bouquet Patterns - Zamiguz26 May 2024