Fiberglass Supply Depot Inc. > Paint > Pigment

Fiberglass Supply Depot Inc. > Hardeners > Methyl Ethyl Ketone Peroxide

Polyester Resins - Resin Pigments & Tints - Page 1 - Fiberglass Supply

The recommended mixing is 2 part Gel Coat to 1 part Webbing Solution. The Webbing Solution is mixed into the Gel Coat of one color and sprayed onto a contrasting color on the substrate to display effects. The product is recommended but not limited for spray application to fiber-glass substrates such as boat decks or hulls, storage compartments and engine compartments etc.

Fiberglass Supply Depot Inc. Clear Webbing Solution Quart

Fiberglass Supply Depot Inc. > Paint > Pigment

Gelcoat with wax is for the final coat. The wax settles to the top and need to constantly be mixed. If not mixed properly your gelcoat will have patches that are still sticky. The wax helps dry the gelcoat all the way so it won't be sticky and also so it can be sanded. Remember without the wax your gelcoat will remain sticky.

Fiberglass Supply Depot Inc. Black Gelcoat with Wax Pint with 15cc Hardener (MEKP)

Fiberglass Supply Depot Inc. > Paint > Pigment

Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy. This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy. 2# Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet.

Fiberglass Supply Depot 4 lb. Density Expanding Foam Kit: 2 Part Closed Cell Polyurethane Liquid Foam for Boat and Dock Flotation, Insulation

Fasco Resin Pigments, including Black Pigment, are popular, non-fading, coloring agents for polyester resins, epoxy resins, gel paste, polyester fillers / putties. Colors may be mixed to match shades. If you desire to tint the gel coat with our coloring agents, mix the coloring agent into the gel coat prior to catalyzing the material. The coloring agent can be added at a maximum amount of 1 oz. per quart of gel coat.

Black Pigment for Epoxy Resin, Gelcoat, Paint - 1 oz

Prussian Blue Pearlescent Resin & Epoxy Powder Pigment - 45 Grams - FDA approved