TN-100 Rug Adhesive, Rug Glue

By A Mystery Man Writer

Last updated 17 May 2024

Specially formulated for handmade rug finishing, the rug adhesive TN-100 is used as a first layer for gluing yarn threads to a primary rug backing. Its durability and flexibility make it a coveted product by rug makers. This glue will never become stiff and will not crumble. Once dry, it stays flexible and act as a superior quality non-slip underlay.
The rug adhesive TN-100 is used as a first layer for gluing yarn threads to a primary rug backing. It can also be used for punch needle, woven projects or simply to reduce slippage on an old rug. This rug glue is specially formulated for handmade rug finishing. Its durability and flexibility make it a coveted product by rug makers. It is safe for all types of yarn, natural or synthetic backings, and any flooring surfaces including heated floors. If properly applied, this superior quality adhesive will ensure you that your rug will last forever without any deformation. This glue will never become stiff and will not crumble. Once dry, it stays flexible and act as a superior quality non-slip underlay.+ + + + + + + + + + + + + + + + + +APPLICATION: + + + + + + + + + + + + + + + + + +► With your rug firmly hung to your tufting frame, apply a coat of glue TN-100 with a paint roller or a disposable brush. An even pressure on your roller will ensure a correct and proper distribution of the glue. Do not apply too much pressure as it would only make the glue to penetrate too deeply into the yarn. The ideal penetration level is determined by the density of your tufting fabric, the number of threads used, and how tight your stitches are. The perfect pressure should allow the glue to penetrate slightly thru the primary backing in order to adequately bond it with the yarn base. ► Allow the latex to dry for 12 to 36 hours before unhooking and handling your final piece. ► If you wish to add a secondary backing to your rug, in order to make it stronger and extend its longevity, we recommend to use the glue TN-200 as a second layer.IMPORTANT: Use in a well ventilated space. The smell of the glue will dissipate as it dries. Keep this product above 15º C or 60º F. Shelf life of 3 to 6 months from shipping date.NOTE: We recommend to test this product on a small surface before using it on a larger scale project. This product contain Latex. People suffering from allergies to latex should take proper measures to ensure their safety. + + + + + + + + + + + + + + + + + +ABOUT THIS PRODUCT+ + + + + + + + + + + + + + + + + +➤ Ingredients: Natural Latex➤ Consistency: Fluid➤ Size: 1 Gallon (3,79 L)➤ Environmentally Friendly and No VOCs➤ Odor level: very mild ammonia➤ Drying Time: 12 to 36 hours➤ Coverage**: 1 Gallon = 100 to 240 sq.ft. **Disclaimer: it will depend on how thickly you apply the latex, along with the type of material you are applying it to**

Henry Carpet Flooring Adhesive (1-Gallon) in the Flooring Adhesives department at

$TN-100 Rug Adhesive, Rug Glue$

Liquid Latex - primairy glue 1 liter – Tuftingshop

RapidFuse Fast Curing Gel with Gel Control Applicator

Floor Rubber Transition Strip Self Adhesive Carpet to Tile Transition Strip Edging Trim Strip for Threshold Transitions with a Height Less Than 5 mm/0.2in (Black, 6.56FT)

$TN-100 Rug Adhesive, Rug Glue$