RDR-3212 High Impact Room/High Temperature Laminating Resin With Hardener Kit - Composite Envisions

By A Mystery Man Writer

Last updated 05 Jun 2024

RDR-3212 High Impact Room/High Temperature Laminating Resin With Hardener Kit - Composite Envisions

High impact system designed with flexibility and top notch toughness in laminating applications
Premium Resin Tech products provide custom epoxy formulations that are dedicated to helping customers design, fabricate, and improve their composites with cost-effective resin solutions. The full-line resin selection is aimed to produce composites parts of the utmost quality specifications meeting a wide range of applications based on the customer's need. RDR-3212 is an unfilled clear epoxy designed for use in both high temp and room temp applications. The High Impact system provides both toughness and strength in a composite matrix with heat distortion temps ranging 250-325 °F dependent on the selected hardener and post cure. This epoxy system provides strong chemical resistance while promoting excellent adhesion and wetting quality on Kevlar, Carbon graphite and Fiberglass cloth reinforcements. As with most high temperature systems, laminates will achieve a demoldable state overnight at ambient temperature. In some instances, tools may be used without post cure. However, for most uses at elevated temperature, post cure is recommended. RDH 9386 Room Temperature Hardener provides a pot life of ~45 minutes at 72°F with a heat distortion temp of 325°F. This system cures at room temperature but requires post cure to obtain optimal mechanical and thermal properties. Note: This product is sold by weight. 8 Lbs = aprox 1 Gallon; 45 Lbs = aprox 5 Gallons and is also available in larger quantities. (Drums and Totes) To ensure quality results and proper curing, please make sure to use the resin shortly after purchase. Premium Resin Tech products are engineered and manufactured in the USA. ** Please be aware that 500 lb drums may have a lead time associated with them regardless of indicated stock status.**

RATIO: 100 pbw to 33 pbw DLRH-3212 is an unfilled, clean epoxy resinsystem with a long pot life. DLRH-3212 is atough, strong, impact resistant resin

HTR212/ H386-99 Laminating Resin

Approvals and Conformities Boeing PN/Spec%23 BMS 8-201, Type IV Alternate PN%23s 1821808 Product Attributes Country of Origin United States Size Quart