ESSMO™ Silver Matte Solid Heat Transfer Vinyl HTV DP04 – EzAuto Wrap

Material Specification: PU Composition Thickness:198 Microns / 7.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Matte Solid Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Pla

Material Specification:

• PU Composition
• Thickness:198 Microns / 7.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Matte Solid Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305°F/150°C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.

Matte Flat White Vinyl Wrap – EzAuto Wrap

Matte Metallic Satin Pearl Silver Vinyl Wrap – EzAuto Wrap

Chrome Silver Vinyl Wrap – EzAuto Wrap

Matte Flat White Vinyl Wrap – EzAuto Wrap

Material Specification: PU Composition Thickness:198 Microns / 7.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

ESSMO™ Silver Matte Solid Heat Transfer Vinyl HTV DP04

Siser EasyWeed Heat Transfer Vinyl HTV for T-Shirts 12

ESSMO™ Gray / Silver Reflective Heat Transfer Vinyl HTV RT04

ESSMO™ Holographic Lightning Silver Pattern Heat Transfer Vinyl

essmo™ – EzAuto Wrap

Matte Glitter Silver Vinyl Wrap – EzAuto Wrap

Ultra Matte Flat Silver Mercury Vinyl Wrap – EzAuto Wrap

Satin Purple Matte Flat Vinyl Wrap – EzAuto Wrap

Matte Flat Gray Vinyl Wrap – EzAuto Wrap

Material Specification: PU Composition Thickness:221 Microns / 8.7 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

ESSMO™ Silver / White Reflective Heat Transfer Vinyl HTV RT03

essmo™ – EzAuto Wrap