Unicorn Heart Soap Mold – NorthWood Distributing

By A Mystery Man Writer

Last updated 03 Jun 2024

Unicorn Heart Soap Mold – NorthWood Distributing

Unicorn Heart Soap Mold This Unicorn Soap Mold features a majestic unicorn surrounded by stars all on a heart shaped bar mold. The unicorn craze keeps growing, so kids and adults alike are sure to love this magical soap mold. Helpful Product Information: Material: Plastic Avg. Bar Weight: 3.10 oz Bar Cavities: 3 Bar De
Unicorn Heart Soap Mold This Unicorn Soap Mold features a majestic unicorn surrounded by stars all on a heart shaped bar mold. The unicorn craze keeps growing, so kids and adults alike are sure to love this magical soap mold. Helpful Product Information: Material: Plastic Avg. Bar Weight: 3.10 oz Bar Cavities: 3 Bar Depth: 1 Bar Width: 2.75 Max Temperature: 135ºF Mold Capacity (oz): 9.1 Common Uses:Melt & Pour Soap. Cold Process Soap. Lotion Bars.Points of Interest: Manufacturer: Milky Way MoldsMaterial: Clear PVC Plastic (Not Approved for Food Contact)Country of Origin: United StatesMilky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.Country Of Origin: United States Helpful Product Information: Material: Plastic Style: Bar Avg. Bar Weight: 4.90 oz Bar Cavities: 3 Bar Depth: 1 Bar Length: 3.5 Bar Width: 2.5 Max Temperature: 135ºF Mold Capacity (oz): 14.70 Directions:Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Care: Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Candle Mold Outside size: 5*3.3*32cm/1.9*1.3*12.6cm. inside diameter: 2.5cm/1inch Heart shape tube soap candle Mold, eraser making mold, dessert mold,