J-B Weld High Heat High Strength Acrylic Epoxy 0.85 oz

JB Weld HighHeat is a two part epoxy system that provides strong and lasting. Mixed at a ratio of 1 to1 it forms a permanent bond that has a 5020 Psi strength and is chemical and fuel resistant. At room temperature HighHeat sets in 1 hour and cures in 24 hours. HighHeat cure time is accelerated by heat and can cure in 1 hour at 250 Degrees.

HighHeat™ is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in

HighHeat Epoxy Putty

J B WELD Products - Search Shopping

JB Weld HighHeat is a two part epoxy system that provides strong and lasting. Mixed at a ratio of 1 to1 it forms a permanent bond that has a 5020 Psi strength and is chemical and fuel resistant. At room temperature HighHeat sets in 1 hour and cures in 24 hours. HighHeat cure time is accelerated by heat and can cure in 1 hour at 250 Degrees.

J-B Weld High Heat High Strength Acrylic Epoxy 0.85 oz

J-B Weld J-B KwikWeld 2 oz. Fast Set Epoxy (Case of 6) 8276H-6

J-B WELD Original Twin Tubes 2-Pack Gray Epoxy Adhesive in the

System Three Epoxy

J-B Weld 50139 Plastic Bonder Body Panel Adhesive and

Rapid Fix High Strength Dual Adhesive

Jb Weld® 2 Oz Original Cold Weld Two-Part Epoxy, Dark Gray

Loctite 1363118 Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe

ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

J-B Weld 50114 ClearWeld Epoxy

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz

J-B WoodWeld syringe- 25 ML.

Epoxy Metal Repair

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted.

J-B Weld 8297 High Heat Epoxy Putty - 2 oz