Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing (Energetic & West3D Collab)

West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing
West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing required for your particular model. Popular Models: 320x310mm - CR10s Pro(v2)/CR10V2/V3 Ender 3 Max 254x241mm - Prusa MK3(s) / MK2.5 235x235mm - Ender 3 (3,3X,Pro etc.), Ender 5, Cr-20, CR-20 Pro, Geetech A10 etc. 196.3x190mm - Prusa Mini 180x180mm - RatRig V-Minion 160x160mm - SaladFork We have our very own PNG for our logo build plates for use in your favorite slicer, thanks Kyleisah#2433! 355/305/255mm 125mm *PLEASE NOTE: This product is not affiliated or endorsed by Voron Design.
West3D believes in community, and that by working with our community we can sustainably promote 3D Printing to the next generation of makers that will take this industry to new heights. West3D supports community through direct engagement with hobbyists and makers, and by sourcing and supplying quality 3D Printer supplies at reasonable prices. We help you turn your ideas into reality. Consider joining us.
West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth). Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick with both PEI sides.  Disclaimer: The smooth side has a protective film to prevent damage during shipment. Please remove this film before use. This flex plate is oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. For double-sided smooth flex plates “Yes Logo” means we put the logo on one side and not on the other. For Voron Sizes: For 350mm builds order a 355mm For 300mm builds order a 305mm For 250mm builds order a 255mm For V0.1 builds order a 125mm For other printers please review the sizing required for your particular model. Popular Models: 320x310mm - CR10s Pro(v2)/CR10V2/V3 Ender 3 Max 254x241mm - Prusa MK3(s) / MK2.5 235x235mm - Ender 3 (3,3X,Pro etc.), Ender 5, Cr-20, CR-20 Pro, Geetech A10 etc. 196.3x190mm - Prusa Mini 180x180mm - RatRig V-Minion 160x160mm - SaladFork We have our very own PNG for our logo build plates for use in your favorite slicer, thanks Kyleisah#2433! 355/305/255mm 125mm *PLEASE NOTE: This product is not affiliated or endorsed by Voron Design.

Product Specification - MagFlexPlate

West3D and Energetic Collab design - Double-sided PEI spring steel sheet (options for textured (powder coated) and smooth, or double sided smooth)

Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing (Energetic & West3D Collab)

West3D's own spring steel black PEI sheet (option for single/double sided) with 3M magnetic Base and adhesive backing (468MP 200MP Adhesive). Magnet

West3D's High Performance Black PEI Bed Flex Plates with High-Temp Magnetic Backing

West3D BDM VORON 2.4 Motion Set - Silver / Darkside (Black)

ACTION Double Sided Magnet - Magnetic Receptive Media

Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing ( Energetic & West3D Collab)

MagFlex® A5 Flexible 3M Self-Adhesive Magnetic Sheet

This is the same magnetic bases we use for our flex plates which are provided in our standard sizes, but can be cut down to any other size you

Magnetic Base with adhesive for Flex Plates

Fan Failure Detection Board by Tim Abraham (timmit99)

Voron V1 (Trident etc.) - West3D Printing

Magnetic Flex Plate Double-Sided and Single-Sided with 3M Magnetic Backing ( Energetic & West3D Collab)

Works with PLA, ABS, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments.BuildTak has also had success with getting t-glase (PETT) to adhere when used

BuildTak 3D Printer Build Surface - Black

West3D's High Performance Black PEI Bed Flex Plates with High-Temp