About decal post-processing solution (Mark Softer, Fit and Setter

Third-party products, including Bandai Wet Decals, each have different characteristics.Each characteristic can be classified by thickness, stiffness, softness and adhesion.If it is thick, the work becomes easier. However, there is a phenomenon in which adhesion and ductility are poor.On the other hand, decals that are too thin are difficult to work with.The most important part of creating these properties is a transparent thin plastic film coated on top of the decal.The composition and physical properties of this plastic film determine the decal characteristics of each manufacturer.The decal should be thin, tough and stick well.Various post-processing agents are used to achieve this purpose.Typically, Mark Setter, Mark Softer, and Mark Fit are used.These solutions make the decal more flexible, making it more adherent to areas with complex molds, and better adhesion due to the adhesive components it contains.However, softened decals make the job difficult.Also, the included adhesives make the area around the attached decal dirty.In order to compensate for these shortcomings, we propose to change the work method.After the decal is properly positioned and dried, applying this solution will make it easier to achieve your goal.The working method is as follows.As previously guided, move the decal and remove moisture appropriately.The decal does not move at this time, but that does not mean it is completely dry.Moisten the solution on a cotton swab and then rub the surface of the decal.You can work with the feeling of sweeping from the inside of the decal to the outside.This work has the effect of softening the fixed decal so that it adheres to the pla-surface.It also has the effect of better adhesion of the decal by reinforcing the adhesive component on the easily liftable edges.It also removes any unstable chemicals that may be present on the decal's surface, reducing the possibility of troubles during the finishing process.This processing step is not essential. However, if you do it with a little time and effort, you can get a little better results.
Third-party products, including Bandai Wet Decals, each have different characteristics.Each characte

Is Mark Setter, Mark Softer, and Topcoat necessary for waterslide decals? : r/Gunpla

Decal softener residue : r/Gunpla

dry transfer decals

Nasos' modelling corner: Yet another decal softener review

Academy 1/48th F-16C decal issues - Jet Modeling - ARC Discussion Forums

40ml Mr Mark Decal Softer And Setter Softener Bottle For DIY Military Tank Ship Plane Model Handicrafts Coloring Building Tool

Mr Mark Setter NEO (Decal Setting Solution), GSi-MS-234

Making Bandai wet decals look like Ez decal : How To of Water

Mr.Hobby MS-231/ MS232 Professional Mark Decal Softer Setter with Glue for Model Building Craft Hobby Tools Combo DIY

Tutorial: How to apply water slide decals