Two Plane Quick Change Wire Straightener for Schleuniger Machines (WS- – J2X Systems LLC

By A Mystery Man Writer

Last updated 27 May 2024

Two Plane Quick Change Wire Straightener for Schleuniger Machines (WS- – J2X Systems LLC

This wire straightener is designed to bolt directly to the existing holes on a Schleuniger cut and strip machine. The straightener is a two plane, 7 roller per plane design with quick change capability. It is suitable for mid-size wire and can be easily adjusted for multiple wire sizes. The approximate range is 10-26
This wire straightener is designed to bolt directly to the existing holes on a Schleuniger cut and strip machine. The straightener is a two plane, 7 roller per plane design with quick change capability. It is suitable for mid-size wire and can be easily adjusted for multiple wire sizes. The approximate range is 10-26 AWG, but actual capability will depend on your wire construction and outside diameter. Design and capability details: Entry point includes a ceramic insert for safe handling of your cable and durability of the guide. Compatibility: Two mounting holes are available for direct mounting to your Schleuniger machine. Mount holes are for M5 screws spaced 25mm on center. Screws are included. Known compatible models: PS9500, EcoStrip 9300, CS9050. Model: WS-12 Technical Specifications: Roll profile: 120° V Groove Number of rolls per plane: 7 Number of planes: 2 Minimum outer diameter: 1mm (0.039”) Maximum outer diameter: Insulated: 4.5mm (0.177”) OD w/ a max conductor size of 3mm (0.118”). Bare: 3mm (0.118”) Documents: User Manual (PDF) Drawing with Mounting Dimensions (PDF)