Japanese "Ikeuchi Hamono" Hand-forged Kensaki shirabiki spear-point marking knife. Hand-forged by japanese master blacksmith Ikeuchi. Size : 15 mm Length of the blade : about 16 cm Blade thickness : about 2 mm Weight : about 50 grams Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes. For right- and left-handed. More precise than a pencil, and it scores the wood. Made in Japan.

Japanese double edge Ikeuchi Hamono Hand-forged Kensaki shirabiki spear-point marking knife.

Hand-forged by japanese master blacksmith Ikeuchi.

Size : 15 mm
Length of the blade : about 16 cm
Blade thickness : about 2 mm
Weight : about 50 grams

Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes.
For right- and left-handed. More precise than a pencil, and it scores the wood.

Made in Japan.

Set of 3 original Japanese SENKICHI wood Oire Nomi chisels.

Size : 9 mm, 15 mm, 24 mm

Chisels are about 23 cm long (9).

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of laminated Hitachi Yasugi Steel.

Made in Japan.

SK-11 Chisel and wood plane adjustable sharpening honing guide SSG-70.

Allows both chisels and plan irons to be held at a constant and steady angle when sharpening and honing. Move the guide up and down on the blade to increase or decrease the angle.

Clamping width range : 
- For chisels : 6-36 mm (0.24 - 1.4)
Blade length : 60 mm or more (2.4)
Blade thickness : 8 mm or less (0.3)

- For planes : 36-70 mm (1.4 - 2.8)
Blade length : 80 mm or more (3.1)
Blade thickness : 8 mm or less (0.3)

Weight : 170 grams
Material : Aluminum alloy
Dimensions : 40 x 33 x 108 mm (1.6x1.3x4.3)

Made in Japan.

Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 120 mm x 120 mm x 70 mm (4.7 x 4.7 x 2.7)
Weight : 165 grams

Made of Oak and carbon steel.

Made in Japan.

Japanese Kiridashi YOSHIHARU carpenter marking carving precision knives.
Available for right or left handed. 

Total length : 12,8 cm (5)
Length of the blade : about 3,7 cm (1.46)
Blade thickness : about 1 mm
Weight : about 20 grams (including sheath)
Blade : Steel
Handle : Brass

Made in Japan.

3 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 3 mm 
Weight : 85 grams
Chisel is about 23 cm long (9).

Made in Japan.

Set of 3 Japanese Tōgyū oire nomi wood chisels.
Laminated carbon steel.

Chisels are about 23 cm long (9).

Size : 9 mm, 15 mm, 24 mm
9 mm : 100 grams
15 mm : 130 grams
24 mm : 170 grams

They are very well balanced, with an iron hoop at the end.

Made in Japan.

Set of 11 Japanese SENKICHI wood chisels.

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm, 42 mm.

Chisels are about 23 cm long (9).

  3 mm : 85 grams
  6 mm : 90 grams
  9 mm : 110 grams
12 mm : 120 grams
15 mm : 130 grams
18 mm : 140 grams
21 mm : 150 grams
24 mm : 170 grams
30 mm : 185 grams
36 mm : 210 grams
42 mm : 240 grams

Made in Japan.

Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 110 mm x 120 mm x 70 mm (4.3 x 4.7 x 2.7)
Weight : 165 grams

Made in Japan.

6 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 6 mm 
Weight : 90 grams
Chisel is about 23 cm long (9).

Made in Japan.

42 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 42 mm 
Weight : 240 grams
Chisel is about 23 cm long (9).

Made in Japan.

30 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 30 mm 
Weight : 185 grams
Chisel is about 23 cm long (9).

Made in Japan.

12 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 12 mm 
Weight : 120 grams
Chisel is about 23 cm long (9).

Made in Japan.

Marking gauge Kebiki with 2 blades Japan dual cutter - Osaka Tools

Hand-forged 15mm Kiridashi carving marking chisel Made in Japan

Marking gauge Kebiki with 2 blades Japan dual cutter Fujiwara

Marking knives, Dieter Schmid - Fine Tools

Kiridashi Japanese Jibiki Marking Knife 15mm - Tyzacktools

Marking gauge Kebiki with 2 blades Japan dual cutter Fujiwara

12mm SENKICHI Chisel oire nomi Yasugi White paper Steel Made in

Thermal Underwear Black Glyph Sportswear And Thermo Leggins

Hand-forged 15mm kensaki shirabiki Spear point marking knife Japan

TIKUSAN Japanese Brass Pocket Knife (Kiridashi) for

TIKUSAN Japanese Brass Pocket Knife (Kiridashi) for

This is an exceptional marking tool. Known as kensaki shirabiki, meaning “sword-tip marking knife,” it is used for incising layout lines, producing a

Japanese Spear-Point Marking Knife

Marking knives, Dieter Schmid - Fine Tools