Arcticlean Plastic seal Trim Coat, 30ml – SWEDISHGLOSS

Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-lik
Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-like surface with an extreme water and dirt repellent effect. Faded bumpers, side mirrors, the holders for the wiper blades and other plastic will be like new again, you can also use Trim coat on your lights, both as a preventive protection and as a "restorer". Trim coat also withstands high heat so you can use it on covers under the bonnet. However, it does not fix ALL problems - e.g. faded red plastic that has turned white. For an application, we recommend that you buy to: 1 pc  Application sponge - coating 1 all-round drying cloth Characteristics: Ceramic sealing of Plastic Size 30 ml SWEDISHGLOSS tip: Highly recommend using an IPA (Isopropranol based) cleaner before applying ceramic lacquer sealer. Spray in the microfiber cloth or directly on the panel to be cleaned and dry until no grease remains. Replace the microfiber cloth if it becomes saturated or too damp. Apple location of product: Shake the bottle and drop Trim Coat onto the supplied application sponge or other suitable sponge/cloth Apply the agent. Remember that soft plastic absorbs more coating than hard plastic. After approx. 1 minute. you can wipe off the excess with a microfiber cloth. Avoid exposing the treated surfaces to moisture/dirt during the first 6 hours after application. It is possible to speed up the curing time with infrared heat. Warning information: H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. P102 Keep out of the reach of children. P233 Keep container tightly closed P261 Avoid breathing vapour. P305+P351+P338 IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove any contact lenses if possible. Continue rinsing.
Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-like surface with an extreme water and dirt repellent effect. Faded bumpers, side mirrors, the holders for the wiper blades and other plastic will be like new again, you can also use Trim coat on your lights, both as a preventive protection and as a restorer. Trim coat also withstands high heat so you can use it on covers under the bonnet. However, it does not fix ALL problems - e.g. faded red plastic that has turned white. For an application, we recommend that you buy to: 1 pc  Application sponge - coating 1 all-round drying cloth Characteristics: Ceramic sealing of Plastic Size 30 ml SWEDISHGLOSS tip: Highly recommend using an IPA (Isopropranol based) cleaner before applying ceramic lacquer sealer. Spray in the microfiber cloth or directly on the panel to be cleaned and dry until no grease remains. Replace the microfiber cloth if it becomes saturated or too damp. Apple location of product: Shake the bottle and drop Trim Coat onto the supplied application sponge or other suitable sponge/cloth Apply the agent. Remember that soft plastic absorbs more coating than hard plastic. After approx. 1 minute. you can wipe off the excess with a microfiber cloth. Avoid exposing the treated surfaces to moisture/dirt during the first 6 hours after application. It is possible to speed up the curing time with infrared heat. Warning information: H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. P102 Keep out of the reach of children. P233 Keep container tightly closed P261 Avoid breathing vapour. P305+P351+P338 IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove any contact lenses if possible. Continue rinsing.

The advanced formula used for ALEXSEAL Topcoat 501 is based on a polyester urethane, with aliphatic resins added to provide many properties of an acrylic finish. Top-quality pigments provide better hiding power to reduce the number of coats required for full coverage, as well as premium UV resistors for unmatched gloss and color retention. For professional use only.

Premium Topcoat 501 - White Basess

Arctic Silver Incorporated - ArctiClean

Wolman Raincoat Water-Based Clear Sealer

Arcticlean Lacquer sealing Base Coat, 30ml – SWEDISHGLOSS

ArctiClean Review - Overclockers

Arcticlean Lacquer sealing Base Coat, 30ml – SWEDISHGLOSS

Aspen Surgical Products 14320 - McKesson Medical-Surgical

ArctiClean 1 Thermal Material Remover: ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases

ArctiClean 60ml Kit 1 & 2 Thermal Grease Paste Compound Remover and Purifier

ArctiClean 60ml Kit (includes 30ml ArctiClean 1 and 30ml ArctiClean 2) : Electronics

Arcticlean Plastic Seal Trim Coat, 30ml – SWEDISHGLOSS

Arcticlean Lacquer sealing Base Coat, 30ml – SWEDISHGLOSS

Arcticlean Base coat is the latest generation of ceramic protection. This ceramic protection is very easy to apply and provides an extremely

Arcticlean Lacquer sealing Base Coat, 30ml

Effectively removes thermal grease compound from your CPU or your heatsink, and prepare it for a new application of thermal grease. Two-step process first removes grease, then purifies the surface for a new application. This pack contains two 30ml bottles.

Arctic Silver ArctiClean Thermal Material Remover and Surface Purifier

ArctiClean 60ML Kit (30ml ArctiClean1+30ml ArctiClean2) & Microfiber (7 X 6) Cleaning Cloth : Electronics